Responds on Virtual Prototyping

From: Chuck Kirschman (Clemson University), André Dolenc (Helsinki University of Technology)
Date: Saturday, July 9, 1994

From: Chuck Kirschman (Clemson  University), André Dolenc (Helsinki University of Technology)
To: F. Mok (University of Warwick)
Date: Saturday, July 9, 1994
Forwarded to RP-ML
Subject: Responds on Virtual Prototyping
Hi there,
     Following is the responds I had received with regards to Virtual Prototyping, which was not sent to the mailing list initially.
     Hope that fellow netters can contribute more to this.
Cheers,
Mok
------------------------
From: ckirsch@eng.clemson.edu (Chuck Kirschman)
Subject: Re: Virtual Prototyping
Mr F C Mok writes:
 > the application of Virtual Reality in Rapid Prototyping. Perhaps, concerning
 > on the advantages or disadvantages and the viability for this usage.
     Ian Gibson at Nottingham presented a paper on this at the 1993 Austin SFF Symposium.  I don't know his email, or whether he reads it.
chuck
[Mok: There's a section on "Virtual Reality & Rapid Prototyping" by Ian Gibson, D. Brown, S. Cobb found in the IEE Publication of "Virtual Reality In Engineering", 1993]
-------------------------
From: Andre Dolenc <ado@cs.hut.fi>
     I am not an expert in VR, but I suppose VR is the best tool to use when RP is too costly or not practical, such as very large parts (imagine an entire car, full scale), or results of complex simulations (turbulance?).
Regards,
Andre'
[Mok: An Initiative Announcement of National Science Foundation, "Rapid Prototyping: Virtual & Physical". Publication No.: NSF94-63. Regretably, the deadline is overdue - June 15, 1994]


Previous message | Next message
Back to 1994 index