adaptive slicing
From:
André Dolenc (Helsinki University of Technology)
Date:
Saturday, October 1, 1994
From: André Dolenc (Helsinki University of Technology)
To: RP-ML
Date: Saturday, October 1, 1994
Subject: adaptive slicing
Elaine Persall writes:
> Adaptive slicing software that works on STL files was developed here at
> Clemson in 1992.
And at HUT in 1992 as well.
> the concept is validated on SLA-250 and a CNC milling machine witj
We have had problems putting our solution on the market because RP machines
are not made for adaptive slicing. They normally work with a fixed number
of slice thicknesses. Ask any SLA 250 operator around the corner what
parameters does he use for a thickness of 0.176....
Regards,
Andre'
Previous message
| Next message
Back to 1994 index