LOM Paper Procedure

From: Ross Gates (Select Manufacturing  Services,     .)
To: RP-ML
Date: Sunday, September 24, 1995
Subject: LOM Paper Procedure
     1.We are using Helisys' new High Performance paper. We have found it to be
difficult to restart the build after the block has cooled down. On the larger
builds, we get a lot of delamination and the build is easily lost. The
parameters that Helisys recommends don't work. Does anyone have a solution?
     2. What are the best methods of removing the build from the platform. We are
using piano wire, but on the large 32 x 22 builds, it is very difficult to
cut through it.