PRESS RELEASE ON NEW LOM MATERIAL FOR HELISYS LOM1015, LOM2030, LOM2030E,
LOM2030H
SINCERELY,
KEVIN ABRAMS
SIBCO, INC
810-827-1792
<HTML><PRE><BODY BGCOLOR="#00ffff"><FONT COLOR="#000000" SIZE=6><B>PRESS RELEASE
FOR IMMEDIATE RELEASE<FONT COLOR="#000000" SIZE=3></B>
<FONT COLOR="#000000" SIZE=3>
<FONT COLOR="#000000" SIZE=5><B>SIBCO, INC. IS PROUD TO ANNOUNCE THE RELEASE OF ITS MOISTURE RESISTANT HIGH PERFORMANCE PAPER.
<FONT COLOR="#000000" SIZE=2>
AFTER 9 MONTHS OF DEVELOPMENT WORK, SIBCO, INC RELEASED FROM BETA TESTING ITS LONG AWAITED MOISTURE RESISTANT HIGH PERFORMANCE PAPER (MRP50XX, XX DENOTES ROLL WIDTH)
THE PAPER IS AVAILABLE IN SIZES 14, 22, AND 28 INCHES WIDE WITH APPROXIMATELY 2400 LINEAL FEET PER ROLL AND THICKNESS OF 0.0045 INCHES, AND 0.009 INCHES THICK.
ADVANTAGES:
1- 0.2% GROWTH IN THE Z DIRECTION UNDER 80% RELATIVE HUMIDITY FOR A PERIOD OF 24 HOURS COMPARED TO 3% GROWTH USING HELISYS'S LPH PAPER UNDER THE SAME CONDITIONS WHEN PART IS NOT SEALED.
2- MATERIAL IS SUPER CALENDERED TO AVOID ANY GROWTH IN THE Z DIRECTION DUE TO OVER COMPRESSION FROM THE HEAT ROLLER DURING PART BUILD.
3- SUPPORT WALL WILL NOT GROW WHEN MACHINE STOPS FOR A PERIOD OF TIME DUE TO MOISTURE ABSORBTION USUALLY SEEN WHEN USING STANDARD PAPER. AS A RESULT, PARTS ARE EASIER TO RESTART AFTER MANUFACTURING STOPPAGE WITH THE MOISTURE RESISTANT PAPER.
4- SINCE THE ADHESIVE IS A THERMOPLASTIC, AND NOT A THERMOSET LIKE THE ONE COATED ON THE LPH PAPER, IT IS EASIER TO REACTIVATE AND THEREFORE TO RESTART PART.
5- THE MOISTURE RESISTANT PAPER LAMINATES AT A FASTER SPEED WHEN COMPARED TO THE HELISYS LPH PAPER DUE TO ITS CAPABILITY TO TRANSFER HEAT THROUGH THE PAPER TO THE ADHESIVE AT A FASTER RATE.
6- THE NEW MRP50XX IS EASIER TO SAND AND DOESNOT GUM UP YOUR SANDING PAPER.
7- THE RANGE OF LAMINATION IS WIDER THAN THE LPH PAPER WHICH MAKES EASIER TO WORK WITH.
8- WHEN A PART IS BUILT WITH THE <U>MRP50XX</U> AND COATED WITH OUR PROPRIETARY <U>LSQ </U>SEALER, IT WILL WITHSTAND UP TO 300 F IN TEMPERATURE , AND WILL NOT GROW IF PLACED COMPLETELY IN WATER FOR 24 HOURS.
THE MRP50XX AND THE LSQ SEALER ARE AVAILABLE IMMEDIATELY FOR SHIPMENT IN SAMPLE PACKS.
SPECIAL PRICING IS AVAILABLE FOR SAMPLE PACKS FOR A LIMITED TIME ONLY.
IF YOU HAVE ANY QUESTIONS CONCERNING THIS PRODUCT OR ANY OTHER PRODUCT, PLEASE CONTACT :
ALI SIBLANI
OR KEVIN ABRAHAMS
SIBCO, INC
21297 HILLTOP STREET
SOUTHFIELD, MI 48034
TEL: (810) 827-1792
FAX: (810) 827-1136
EMAIL: SIBCOINC@AOL.COM</B></PRE></HTML>
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:39:13 EEST