The resolution of the STL file from AutoCAD can be increased before
executing the STLOUT command. Enter the command FACETRES and then enter a
value of 10 (I think the range is from .5 to 10 with 10 being best and .5
being the default).
Good Luck,
Chuck Alexander
Solid Concepts Inc.
Rapid Prototyping Software & Services
email: chuck@solidconcepts.com
ph. 805/257-9300
fax 805/257-9311
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:39:29 EEST