......
I anyone using the new 4.1 NT software for the SLA500?
If so: Does the modem work?
Any build problems?
Networking problems?
Can you switch between NT and 1.8?
Thank you,
Ingrid Timmel
Ingrid,
Here is my experience with 4.1.1. I have installed this software on
three
SLA500s and one SLA350. All four machines were running on NT and 4.0.
1. Installation is a breeze. It took me less than 5 minutes to install
the
software on each machine. It might be longer, if you should install NT
also.
2. Building good parts for over four weeks.
3. Has some very neat features like build time estimator (much
accurate),
smart power (you don't need to crank power up or down manually anymore),
improved log, remote notification (I've not tried this feature yet) and
very
friendly interface for machine diagnostics and a ton of other features.
4. Looks like is bug free. It is too early to say this with certainty
though.
5. Correctly uses planar model to calculate photo speeds when vectors
overlap.
6. I don't think 1.8 can be used once you install 4.1.1 (because
"Mover"
cannot be used anymore.)
This is the best software product I've ever seen released by 3D.
Kamesh
PS: Note down which "Geo-file" your machine is currently using before
you
install 4.1.1. Make sure 4.1.1 uses the same file for part building.
----------
From: Ingrid Timmel[SMTP:a055328@fpu013.fpp.com]
Sent: Monday, February 02, 1998 9:15 AM
To: rp-ml@bart.lpt.fi; rp-ml@bart.lpt.fi
Subject: 3DSYS 4.1 NT Workstation Software
Fisher Price
itimmel@fpp.com
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:44:48 EEST