Re: 3DSYS 4.1 NT Workstation Software

From: harrjp@juno.com
Date: Wed Feb 04 1998 - 16:22:44 EET


Kamesh,

Are you using Maestro 1.8 or 1.9

Thanks,
Jim Harrison
3Dimensional Engineering
www.3de.net

On Mon, 2 Feb 1998 15:16:01 -0600 Kamesh Tata <ktata@il1.plynex.com>
writes:
>Ingrid,
>Here is my experience with 4.1.1. I have installed this software on =
>three SLA500s and one SLA350. All four machines were running on NT and
>=
>4.0.=20
>
>1. Installation is a breeze. It took me less than 5 minutes to
>install =
>the software on each machine. It might be longer, if you should
>install =
>NT also. =20
>2. Building good parts for over four weeks.
>3. Has some very neat features like build time estimator (much =
>accurate), smart power (you don't need to crank power up or down =
>manually anymore), improved log, remote notification (I've not tried =
>this feature yet) and very friendly interface for machine diagnostics
>=
>and a ton of other features.
>4. Looks like is bug free. It is too early to say this with
>certainty =
>though.=20
>5. Correctly uses planar model to calculate photo speeds when vectors
>=
>overlap.
>6. I don't think 1.8 can be used once you install 4.1.1 (because =
>"Mover" cannot be used anymore.)
>
>This is the best software product I've ever seen released by 3D. =20
>Kamesh
>
>PS: Note down which "Geo-file" your machine is currently using before
>=
>you install 4.1.1. Make sure 4.1.1 uses the same file for part =
>building. =20
>
>
>
>=09
>
>----------
>From: Ingrid Timmel[SMTP:a055328@fpu013.fpp.com]
>Sent: Monday, February 02, 1998 9:15 AM
>To: rp-ml@bart.lpt.fi; rp-ml@bart.lpt.fi
>Subject: 3DSYS 4.1 NT Workstation Software
>
>I anyone using the new 4.1 NT software for the SLA500?
>If so: Does the modem work?
> Any build problems?
> Networking problems?
> Can you switch between NT and 1.8?
>
>
>--=20
>Thank you,
>
>Ingrid Timmel
>Fisher Price
>itimmel@fpp.com
>
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
>
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:44:49 EEST