Anyone ever used bioerodible polymers on SLS?

From: #PHUA KHIANG SONG KENNETH# (P7207064Z@ntu.edu.sg)
Date: Sat Mar 21 1998 - 03:51:04 EET


Has anyone ever attempted any bioerodible polymers on the SLS before? Some
well-tested (and FDA approved) ones are the homopolymers and copolymers of
lactic and glycolic acid.

The following info would be very useful:~

1. General Properties
        - Specific Density
        - Water Absorption
         - Density
        - Average particle size

2. Thermal Properties
        - Glass Transition Temp
                - DTUL. 0.45MPa
                - DTUL. 1.82MPa
        
3. Mechanical Properties
          - Tensile Strength
        - Tensile Modulus
        - Tensile Elongation at Break
        - Impact Strength
                - Notched Izod
                       - Unnotched Izod

4. Process-related Properties
         - Ash Content
        - Surface Finish
                       - As Processed
                - After Polishing

Regards,

Kenneth
Nanyang Technological University
Singapore

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:45:09 EEST