Dear Mr/Ms.,
I am very pleased to tell you that your paper
is accepted by the Organizing Committee of ICRPM '98 Beijing. And you are
invited to take part in ICRPM '98 and visit the Center of Laser Rapid
Forming (CLRF), Tsinghua University (TU), Beijing, China in July 21-23.
After this Conference, you could have a chance to post conference tours in
Beijing.
REGISTRATION FEES: Authors/Delegates US$280 (before May 31, 1998) US$350
(after May 31, 1998)
Research Student US$150 (before May 31, 1998) US$200 (after May 31, 1998)
Accompanying Person (Banquet & Refreshments only)
US$100 (before May 31, 1998) US$140 (after May 31, 1998)
POST CONFERENCE TOURS: July 24, Great Wall US$50
July 25, Forbidden City US$25
July 26, Summer Palace US$25
CHEQUE PAYBALE TO:
BNF'S NAME & A/C NO: CHINA MERCHANTS BANK,
BEIJING BRANCH BEIJING,
CHINA A/C NO: 400-007770
BNF'S CHIPS UID: 343306
BANK'S NAME & ADDRESS: CHASE MANHATTAN BANK, NEW YORK
MESSAGE: BEIJING YIN HUA LASER RAPID PROTOTYPING MADE AND MOULD TECHNOLOGY
CO. LTD. (0382302132001)
I am looking forward to your visit. Please tell us your flight number. We
will set up the Reception Center in Beijing Airport 8:00 a.m. to 23:00 p.m.
in July 20. If you go to Tsinghua University by yourself, please ask taxi
driver to find Jia Suo Hotel in Tsinghua University. Please tell us to check
in the Hotel for you.
Reference: Jia Suo Hotel in Tsinghua University: US$50/Day (One Room)
Money for Meals: US$30-40/Day (One Person).
Sincerely
Yongnian Yan
March 21, 1998
Dear Mr./Ms.:
Have you received our invitation letter for International Conference of
Rapid Prototyping & Manufacturing, Beijing '98? Now we give you following
invitation notice, which is from our government. The person invited to our
conference must be invited by the concerned department of our country. Thus
you should fill in a form , so that we can hand in it to the government. I
hope you can fill in it and send it back to me as soon as possible (Maybe
by Fax is the best). Then we could collect all of your back letter to our
government to get authorized document from National Education Committee of
China. After above mentioned procedure, we could mail you a formal document,
you could bring it to the Chinese Embassy or Consulate-General in your
Countries for Visa.
INVITATION NOTICE
NAME: PROFESSION:
NATIONALITY: PASSPORT NO.:
UNIT:
CITY: STATE:
DATE:
DEARS MR/MS. ,
YOU ARE KINDLY EXPECTED BY TSINGHUA UNIVERSITY TO COME TO BEIJING,CHINA,
ON LUJY 20, 1998 FOR ICRPM '98, THE DURATION IN CHINA WILL BE 7 DAYS, PLEASE
APPLY FORTHWITH FOR ONE ENTRY VISA(S) AT THE CHINESE EMBASSY OR
CONSULATE-GENERAL IN WITH THIS NOTICE.
THE INVITED PERSON(S) AND ACCOMPANYING MEMBERS:
1. NAME PROFESSION
NATIONALITY PASSPORT NO.
2. NAME PROFESSION
NATIONALITY PASSPORT NO.
3. NAME PROFESSION
NATIONALITY PASSPORT NO.
DEPARTMENT OF FOREIGN AFFAIRS
STATE EDUCATION COMMISSION
THE PEOPLE'S REPUBLIC OF CHINA
(0115)
P. S. THIS NOTICE IS VALID ONLY FOR THREE MONTHS
Sincerely yours
Prof. Renji Zhang (Member of Organization Committee of the ICRPM Beijing '98)
April 1, 1998
Titles of Papers for the First International Conference on
Rapid Prototyping and Manufacturing, Beijing '98 (ICRPM, Beijing '98)
Report in a Plenary Session
1. T. T. Wohlers: Worldwide Developments & Trends in Rapid Prototyping &
Tooling (Wohlers Company, USA)
2. Allan Lightman, Richard Chartoff, Don Klosterman, Jill Ullett and John
Schultz: Rapid Prototyping Material Advances in Ceramics and
High-Temperature Photopolymers (University of Dayton, USA)
3. Yongnian Yan et al.: Development of Rapid Prototyping and Manufacturing
in China (Tsinghua University, China)
4. Mathew M. F. Yuen: Development of Software Used in Rapid Prototyping
(Hong Kong University of Science & Technology, Hong Kong, China)
5. Dockstader Lee: RP 3D in Asia and recent advances for SLA and in Rapid
Tooling (3D Systems Co., USA)
Session I: RPM Materials and RPM Processes
6. Grier Lin, Tien-Fu Lu and Yousheng Yin: CAD-Based Machining Program
Generation for Rapid Prototyping by Two Cooperating Robots (University of
South Australia, Australia)
7. S. H. Masood, W. Rattanawong and P. Iovenitti: Minimisation of
Volumetric Error in Part Orientations in Rapid Prototyping (Swinburne
University of Technology, Australia)
8. Christiane Beyer, Christian Birke and Karl-H Grote: A Closed Process
Chain of 3D-Digitizing Solid Modeling and Rapid Prototyping for the
Development of New Products and Reverse Engineering (Otto-von
Guericke-University Magdeburg, Germany)
9. Zhang Xianglin, Huang Jin, Hu Futai, Zhang Chang, Li Yan and Huang
Shuhuai: The Study of Key Problems Related to the Sheet Material Used in
Laminated Object Manufacturing Process (Huazhong University of Science and
Technology, China)
10. Fan Zitian, Huang Naiyu, Li Yan, Xiao Yuejia and Han Ming: Analysis of
the Precision of the Part Made by Selected Laser Sintering (SLS) (Huazhong
University of Science and Technology, China)
11. M. MacRobert and E. Siores: Accelerated Ceramic Product Development
Using Microwave Heating (Swinburne University of Technology, Australia)
12. J. Oberhofer: Laser-Sintering Solutions for Rapid Prototyping, Tooling
and Manufacturing -The Fast Track to Efficient Product Development (EOS
GmbH, Germany)
13. W. Q. Song, S. H. Masood, J. H. Hodgkin and Chris Friedl: Development
of Metal-Polymer Composites for Fused Deposition Modeling (Swinburne
University of Technology, Australia)
14. Bai Junsheng and Yu Chengye: The Influence of Scanning Part's Quality
Produced by Using SLS (Nanjing University of Science & Technology, China)
15. Jiquan Yang, Chunjin Lu, Liya Hou and Tao Dong: Precisional Analysis in
Building Micromachine by RP&M (Nanjing University of Science & Technology,
China)
16. Lu Chunjin, Hou Liya and Yang Jiquan: An Effective Slicing Procedure
for Micro-Machine Rapid Prototyping System (Nanjing University of Science &
Technology, China)
17. Xu Wenji, Deng Qilin, Fang Jiangcheng, Jin Zhuji and Lu yishen:
Plasma-Spray Forming Ceramic Parts Rapidly (Dalian University of Science and
Technology, China)
18. Pei Kang Bai, Jun Cheng and Linquan Zhu: The Rapid Prototyping
Technology of Length-alterable Line-Scanning (North China Institute of
Technology, China)
19. Shek Kiu Chan, Renji Zhang, Fushi Zhang, Yingying Liu, Guosheng Huo and
Yunming Zhu: Study on Properties and Shrinkage of Photoresins Used in SLA
(Macau University, Macau)
20. Guoran Hua, Xinhua Luo, Yaxin Tang, Junsheng Bei and Chengye Luo:
Processing Study on Selective Laser Sintering of Iron Powder Materials
(Nantong Institute of Technology, China)
21. Ming Liang, Talal Habib, Mark Liu and Millan Yeung: Analysis of Shape
and Volume Errors in the Selective Laser Sintering Process (University of
Ottawa, Canada)
22. Li Yan, Huang Jin, Zhang Xianglin and Han Ming: Study on Layer Material
in RPM-LOM System (Huazhong University of Science and Technology, China)
23. W. Sun and F. Ko: Rapid Prototyping in Design for Manufacturing of
Composite Structures (Drexel University, USA)
24. Inhaeng Cho, Yonggak Song, Kyunghwan Rho and Kunwoo Lee: Development of
Automatic Decubing Layered Manufacturing Systems (Seoul National University,
Korea)
25. F. Xu, H. T. Loh and Y. S. Wong: Optimal Orientation Selection in
Different Rapid Prototyping Processes (National University of Singapore,
Singapore)
26. R. I. Campbell: Optimisation of Build Orientation for Feature-based
Surface Roughness Requirements (University of Norttingham, UK)
27. Guodong Hong et al.: Research on the Bonding of Paths in MEM (Tsinghua
University, China)
28. Liangwei Wu et al.: Processing Analysis and Control of Melted Extrusion
Manufacturing System (Tsinghua University, China)
29. Rendong Wu et al.: The integration of continuous extrusion and discrete
spray (Tsinghua University, China)
30. Bo Han et al.: Research of key problems of laminated material used in
SSM process (Tsinghua University, China)
31. Haibing Guo et al.: Research on the Parameter Expressing the Quality of
Laser Cutting in SSM(LOM) Technology (Tsinghua University, China)
32. Zhaohui Du et al.: Stduy of Patternless casting mold making dirven by
CAD model (Tsinghua University, China)
33. Feng Wang et al.: Concurrent Processing Technology for Large Scale
Prototype Manufacturing (Tsinghua University, China)
34. Yonghong Guo et al.: The Optimal Design of M-RPMS Control System
(Tsinghua University, China)
35. Yi Xu: SOUP System (NTT DATA CMET, Japan)
36. Liqun Zhu, Xiaoli Lin and Yinhui Huang: General Control System for RP&M
(Nanjing University of Aeronautics and Astronautics, China)
37. Y. G. Wang: The Definition and Criterion of Accuracy for Rapid
Prototyping (Kinergy PTE Ltd., Singapore)
38. Clement K. Y. Mak, David C. C. Lam, Mathew M. F. Yuen and Ajay Joneja:
Deformation Behavior of New Laminated Object Modeling (LOM) Composite (Hong
Kong University of Science & Technology, Hong Kong, China)
Session II: CAD/Solid Modeling and Process Simulation
39. S. H. Choi and S. Sanmavadam: A Virtual Reality System for Rapid
Prototyping (The University of Hong Kong, Hong Kong, China)
40. Christiane Beyer, Karl-H Grote, Soeren Schumann and Alexander Tenbusch:
Surface Reconstruction of Digitized Objects and Data Implementation into
Solid Models-a Time Saving Procedure for the Rapid Prototyping Development
Process (Otto-von Guericke-University Magdeburg, Germany)
41. D. Fichtner and C. Schone: Digitized Data Be Used in Various Fields of
Reverse Engineering (University of Dresden, Germany)
42. Liu Ailin, Xiao Yuejia, Hang Ming and Huang Shuhuai: Contour Direct
Fuzzy Internation and Its Application in Rapid Prototyping and Manufacturing
(Huazhong University of Science and Technology, China)
43. You He Liu and Louis K. P. Chu: Multimedia CAI Courseware in Learning
Rapid Prototyping Technology (South China University of Technology, China)
44. Liang-Chia Chen and Grier C. I. Lin: NURBS Surface Reconstraction for
Rapid Prototyping Manufacturing Using an Automatic Reverse Engineering
Approach (University of South Australia, Australia)
45. Weiyi Wang, Huanming Gong, Jianhua Ye and Yujia Xia: CAD/CAM for Laser
Rapid Prototyping System (Shanghai University, China)
46. T. L. Lau and Yang Qinghao: Determination of Die-open Directions in
Virtual Prototyping of Die-design (University of Hong Kong, Hong Kong, China)
47. Junghoon Hur, Inhaeng Cho, Heesuk Kang, Kunwoo Lee, Donghoon Lee and
Jaehong Ahn: RapidWORKS98: An STL-Based Workbench for Rapid Prototyping
Systems (Seoul National University, Korea)
48. Su Wang et al.: Surface Reconstruction from Unorganized Points
(Tsinghua University, China)
49. Lihua Lin et al.: 3D Reconstruction from Photogrammetry (Tsinghua
University, China)
50. Jun Zhu et al.: Research on Database Design of RP Software Processing
STL (Tsinghua University, China)
51. Yuan Liu et al.: The Study on the Accuracy of CAE System Based on the
Rapid Tooling Manufacturing (Tsinghua University, China)
52. Renji Zhang et al.: Interface Model for Rapid Prototyping Manufacturing
(Tsinghua University, China)
53. L. Wang, M. C. Leu, Z. Deng and D. Blackmore: Numerical Implementation
and Verification of General Curvature Matching Method for Five-Axis NC Tool
Path Generation (The City University of New York, USA)
54. Huang Qiming and Wang Yungan: Research on Intelligently Slicing Form in
STEP Files (Huazhong University of Science and Technology, China)
55. Terry K. K. Chang, Mathew M. F. Yuen, Ajay Joneja and David C. C. Lam:
SurfaceModel Slicing for Rapid Prototyping (Hong Kong University of Science
& Technology, Hong Kong, China)
56. Ajay Joneja, Anthony Pang, Mathew M. F. Yuen and David C. C. Lam: An
Integrated CAD?CAM System for Rapid Prototyping Applications (Hong Kong
University of Science & Technology, Hong Kong, China)
57. Zhiwen Zhao and Luc Lapperrire: Direct Solid Model Slicing for RP on
Internet (University of Quebec, Canada)
58. Ben Steinberg, Gerald Farin and Anshuman Razdan: From Digitized Data to
B-Spline Surface Meshes (Arizona State University, USA)
59. Weiyin Ma and Shoubin Liu: Constructing a CAD Model from Physical Part
throughCT-Scanning (City University of Hong Kong, Hong Kong, China)
60. Zhang Longbo, Liu minglie and Yu Dong: Research and Development of
RC-Based CNC System with Open Architecture (Shengyang Institute of Computing
Technology, China)
Session III: Rapid Tooling
61. Rui J. Neto, Teresa Duarte and A. Barbedo Magalhaes: Conversion of
Rapid Prototyping Models into Metallic Tools and Prototypes (Rapid Tooling)
(INEGI, Portugal)
62. Zongyan He and Gongyao (Jack) Zhou: A New Rapid Tooling Technique:
Rapid Pattern Based Powder Sintering (RPBPS) (Drexel University, USA)
63. Jilin Ye and Wulanmuqi: Rapid Tooling¡ªRapid Abrading Process
Integrated with Rapid Prototyping (Beijing University of Aeronautics &
Astronautics, China)
64. Ma Li, Wang Congjun, Xiao Yuejia and Huang Shuhuai: Rapid Tooling Is
Rapid Developing (Huazhong University of Science and Technology, China)
65. Deng Qilin, Tang Yaxin, Fang Jianchen, Yu Chengye and Zhou Jinjin:
Study on Manufacturing 3D Parts by Laser Sintering Ceramic Powder (Dalian
University of Science and Technology, China)
66. Chang-Xue (Jack) Feng: From Rapid Prototyping to Rapid Tooling (The
Pennsylvania State University, USA)
67. Chang-Xue (Jack) Feng: Teaching Rapid Prototyping and Tooling in the
Undergraduate Program (The Pennsylvania State University, USA)
68. Dongping Shi: Surface Finishing of Rapid Tooling Parts (The University
of Hong Kong, Hong Kong, China)
69. Da Xu et al.: Study on Technique of Transferring Nonmetallic Molds
(Tsinghua University, China)
70. Haiou Zhang and Takeo Nakagawa: Injection Molding Tool Produced by
Powder Spray of StainlessStreel (Huazhong University of Science and
Technology, China; University of Tokyo, Japan)
71. T. C. Zuo and Y. T. Pei: Direct Production of Metallic Parts by Laser
Powder Stereo-Cladding (Beijing Polytechnic University, China)
72. M. H. Mak, C. K. Y. Mak, C. C. Chan, M. Yuen, M. F. Yuen, A. Joneja and
D. C. C. Lam: Rapid Tooling with New LOM Composite Sheets (Hong Kong
University of Science and Technology, Hong Kong, China)
73. Lu Chen: The Study and Application of RP Tooling (Shanghai Jiao Tong
University, China)
Session IV: Applications in Industries and Medicine
74. V. Curicuta, D. R. Alexander, S. Gasser, R. J. De Angelis, B. W.
Robertson, E. A. Kolawa and J. K. Krause: Laser Bonding of Metals to
Ceramics (University of Nebraska-Lincoln, USA)
75. Eiji Inui: New Rapid Prototyping & Application (Kira Corporation, Japan)
76. D. Fichtner, J. Hoffmann and E. John: Experiences in Fabrication and
Using of Stereolithography Models on the Field of Mouth, Jaw and Face
Surgery, (University of Dresden, Germany)
77. Tang Yaxin, Huang Yinhui, Zhao Guoguang, Yu Cheye, Zhu Liqun, Gao
Liqun, Zhao Jianfeng and Li Xiaolin: Development of Selective Laser
Sintering System (Nanjing University of Areonautics & Astronautics, China)
78. Louis Chu and Huizhong Zhu: Turning Idea into Reality-A Jiont Venture
between Tsinghua University and the Hong Kong Polytechnic University in New
Product Development (The Hong Kong Polytechnic University, Hong Kong, China)
79. W. Vancraen, B. Swaelens and B. V. Schueren: Technical and Medical Work
Preparation Software (Materialise NV Co., Belgium)
80. Zhiwen Zhao and Luc Laperriere; On-line Rapid Prototyping Information
and Service (University of Quebec, Canada)
===================================
Prof. Yan Yongnian
Mechaniacl Engineering Department
Tsinghua University
Beijing, 100084
P.R.C.
Tel: 8610 62783565 (Office)
8610 62785718 (Home)
Fax: 8610 62785718
===================================
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:45:14 EEST