NUMERISATION 3D / HUMAN MODELING SHOW in PARIS

From: Herve de Baillenx (debaillenx@multistation.com)
Date: Thu May 14 1998 - 23:07:21 EEST


PREPROGRAMME NUMERISATION 3D / HUMAN MODELING
NUMERISATION et CONTROLE

Mercredi 27 et Jeudi 28 Mai 1998 - UIC - PARIS 15ème - FRANCE

Pour sa troisième édition, NUMERISATION 3D- HUMAN MODELING reflète la
mouvance et l'explosion de ces technologies. Le colloque s'attache bien
entendu à définir l'état de l'art, mais le thème de l'édition 98 est
Numérisation et Contrôle avec l' évocation de l'usage dans les ateliers de
la numérisation comme moyen de contrôle . Le comité techique n' a pu
retenir l'ensemble des thèmes proposés et a sélectionné les conférences
ci-dessous comme représentatives de la situation du marché ; un forum
commercial est mis à la disposition de Messieurs les Exposants pour les
conférences à caractère trop engagé.... consultez avec compréhension et
contribution et soyez les bienvenus sur le nouveau site
http://numerisation3D.com...
  
Comité Technique: B. DUFLOS, Ingénieur- Y.Loisance, MULTISTATION S.A. -
J.Millet, BERTIN - Dr Ing Sabine Roth-Koch, FRAUNHOFER INSTITUT Stutgart -
D.Humblot, SILMA - M.Paramythioti, MENSI - L.Vergnaud, KREON - P.Véron ,
LABORATOIRE BIOMECANIQUE DU MOUVEMENT.

PROGRAMME DEFINITIF NUMERISATION 3D 98

MERCREDI 27 MAI - MATIN
LES CAPTEURS 3D DE LA NUMERISATION 3D

09:30 Les marchés de la numérisation 3D, situation économique, enjeux,
perspectives
J.C Tasse, CTTM
09:40 Les marchés émergents de la Numérisation 3D
J. Millet, Bertin
09:50 Les capteurs 3D : état de l'art
Dr. Breuckmann - BREUCKMANN GmbH (Meersbourg)
M. Bourdet - LURPA
M. Djeapragache - ADEPA
10:45 Intercomparaison des méthodes de mesure 3D par procédé optique
A. Martin-Rabaud - METRIDE
11:10 Pause et visite de l'exposition
11:40 Calibration d'un imageur laser 3D
A. Cadio - CYBERNETIX
12:05 Mesure de déformation 3D par stéréovision
J.J Orteu - Ecole des Mines d'Albi - LAAS CNRS
12:30 Déjeuner
MERCREDI 27 MAI - APRES MIDI
LES APPLICATIONS INDUSTRIELLES

14:00 L'ingenierie inverse chez Renault
J.M Célérier - RENAULT
14:20 Modélisation 3D d'un environnement industriel
J.L Lubawy - EDF - CNEPE
14:40 Gagner du temps pour la conception de solutions aciers
M. Munier - SOLLAC
15:00 Pause et visite de l'exposition
15:30 Augmenter le rendement d'inspection de l'état des chaussées
V. Paumier - SAMRA - SCETAUROUTE
15:50 Le Colosse ressuscité d'Alexandrie
M. Albouy - EDF - MECENAT TECHNOLOGIQUE et SCIENTIFIQUE
16:10 Mesure de l'architecture des plantes par digitalisation 3D
H. Sinoquet - INRA - U.A BIOCLIMATOLOGIE - PIAF
16:30 Pause et visite de l'exposition
DIGITALISATION ET CONTROLE
17:00 - 18:00 : Table ronde avec les principaux acteurs
Zeiss / Silma / Imageware France ... et un éditeur de logiciel de mesures
et de CAO
18:00 - 20:30 Forum Commercial : Présentation de spots de 7 min.
Président de séance : B. Duflos - SURFACE LAB
Modérateur : Y. Loisance, MULTISATION SA
Absys, Ecoutez-Voir, Holo 3, Imageware France, Krypton, LK France, Micro
Controle, Technodigit, Trade Concept, Vitronic...

JEUDI 28 MAI - MATIN
RECONSTRUCTION DE MODELES 3D

09:30 Etat de l'Art des méthodes de reconstruction de modèles 3D à partir
de données digitalisées
S. Roth-Koch - FRAUNHOFER INSTITUT - STUTTGART
09:55 Génération de surfaces maillées triangulaires à partir de grands
nuages de points
Dr. T. schreiber, UNIVERSITY OF KAISERSLAUTERN
10:20 Algorithmes de recouvrement (matching) : la problématique de base de
l'ingénierie inverse
A. Kerstens - KATHOLIEKE UNISERSITEIT LEUVEN
10:45 Pause et visite de l'exposition
11:15 Extraction de lignes caractéristiques de la forme d'un objet à partir
d'une représentation polyédrique
Ph Véron, D Lesage et JC Léon du LBM (Labo de Biomécanique du Mouvement)
11:40 Utilisation de la tomographie scanner X pour le contrôle et l'analyse
de pièces moteurs complexes
P. Ménégazzi, S. Henriot - INSTITUT FRANCAIS DU PETROLE
A. Dupont - RENAULT
N. Martineau - PEUGEOT
12:05 Faire le pont entre l'imagerie médicale et la CAO
B. Swaelens, P. Nijs, L. Boeykens, S. Lievens, W. Vancraen
12:30 Déjeuner
JEUDI 28 MAI - APRES MIDI
HUMAN MODELING

14:00 Etat de l'art des systèmes d'analyse du mouvement : outils actuels
pour la modélisation du coprs humain
L. Chèze - LBM (Labo. Biomécanique du Mouvement) - Lyon
14:20 Modèle cinématique ergonomique du dos et du cou
D. Besson et J. Dimmet - LBM - Lyon
14:40 Modèle ergonomique du membre inférieur
E. Karabinova, L. Chèze et J. Dimmet - LBM - Lyon
15:00 Pause et visite de l'exposition
15:30 Modélisation des détails du corps humain dans un contexte de réalité
virtuelle
N. Thalmann - MIRALAB, Université de Genève
16:30 Modélisation mathématique de mannequin de choc latéral utilisé pour
la réglementation en sécurité routière
F. Bermond, Bouquet, Ramet, Caire - INRETS
17:00 Modélisation par éléments finis de la tête humaine avec Radioss
M. Willinger - LABO DES SYSTEMES BIOMECANIQUES - Strasbourg

VERSION ANGLAISE

NUMERISATION 3D / HUMAN MODELING 98 PROGRAM
NUMERISATION and CONTROL
Reverse Engineering and InspectionTechniques
Wednesday 27th and Thursday 28th of May 1998
UIC - PARIS 15th - FRANCE

Technical committee: B. DUFLOS, Engineer- Y.Loisance, MULTISTATION S.A. -
J.Millet, BERTIN - Dr Ing Sabine Roth-Koch, FRAUNHOFER INSTITUT Stuttgart -
D.Humblot, SILMA - M.Paramythioti, MENSI - L.Vergnaud, KREON - P.Véron ,
LABORATOIRE BIOMECANIQUE DU MOUVEMENT.

Wednesday the 27th of May 98 Morning
Numerisation 3D's 3D Sensors
Chairman : D. Humblot - SILMA

09h30 Markets of the numerisation 3D, economical background, stakes, outlook
        JC TASSE, CTTM
09h40 Emerging markets of Numerisation 3D, J. Millet - BERTIN
09h50 3D sensors : state of the art, Dr. Breuckmann - BREUCKMANN GmbH - M.
Bourdet - LURPA, M. Djeapragache - ADEPA
10h45 Intercomparison between 3D optical measuring methods, A.
Martin-Rabaud - METRIDE
11h10 Break and visit of the exhibition
11h40 Calibration of 3D laser sensors, A. Cadio - CYBERNETIX
12h05 Measurement of 3D deformation by stéréovision J.J Orteu - Ecole des
Mines d'Albi

Wednesday the 27th of May 98 Afternoon
INDUSTRIAL APPLICATIONS
Chairman : M. Paramythioti - MENSI

14h00 Reverse engineering at Renault's, J.M. Célérier - RENAULT
14h20 Industrial background 3D modeling, J.L. Lubawy - EDF - CNEPE
14h40 Gain time for the conception of steel solutions, M. Munier - SOLLAC
15h00 Break and visit of the exhibition
15h30 Increase the efficiency of the roadway's state, V. Paumier - SAMRA -
SCETAUROUTE
15h50 Alexandrie's colossus resurrection, M. Albouy - EDF, Technological
and scientific
16h30 Break and visit of the exhibition

CONTROL AND NUMERISATION
Chairman : M. Paramythioti - MENSI
Geometry control by the use of clouds of points
Numerisation 3D enters in workshops : what do main actors of Numerisation
3D think about it?

17h00 Round table with the main actors:
        Imageware France, Silma, Zeiss France...and a measuring and CAO softwares
editor
18h00 Commercial Forum by the presentation of 7 min spots
        Chairman of the session: B. Duflos - SURFACE LAB
        Moderator: Y. Loisance - MULTISTATION SA
        3D Scanners, Holo, Imageware France, Kréon, Krypton, Laser Design, Métris,
LK France, Mensi, Minolta, Micro Contrôle, Multistation, Sageis, Silma,
Surface Lab, Techsoft, Technodigit, Trade Concept, Vitronic, Absys...

Thursday the 28th of May 98 - Morning
3D models reconstruction
Chairman : Sabine Roth-Koch - FRAUNHOFER INSTITUT - STUTTGART.

09h30 State of the Art of reconstruction geometric methods based on
digitized data
        S. Roth Koch - FRAUNHOFER INSTITUT - STUTTGART
09h55 Generating triangular surface meshes from large sets of unorganized
3D points
        Dr. T. Schreiber, UNIVERSITY OF KAISERSLAUTERN
10h20 Matching algorithms - Key components in Reverse Engineering, A.
Kerstens - CATHOLIC UNIVERSITY OF LOUVAIN
10h45 Break and visit of the exhibition
11h15 Features lines extraction from polyedric models, Ph Véron, D Lesage
et JC Léon du LBM (Labo de Biomécanique du Mouvement)
11h40 Structural analysis and inspection of complex motor parts by using
tomography
        M. Ménégazzi - INSTITUT FRANCAIS DU PETROLE - M. Dupont - RENAULT - M.
Martineau -PEUGEOT
12h05 Making a bridge between Medical Imagery and CAO, B. Swaelens - NIJS,
L. Bocykens, W. Vancraen, S. Lievans - MATERIALISE N.V. (b)

Thursday the 28th of May 98 - Afternoon
HUMAN MODELING
Chairman :
Ph. Véron, LABBORATOIRE DE BIOMECANIQUE DU MOUVEMENT - Lyon.

14h00 State of the art of actual movement analysis systems: actual tools
for human modeling, L. Chèze, LABORATOIRE DE BIOMECANIQUE DU MOUVEMENT,
LYON.
14h20 Cinematic of back and neck ergonomic model. Influence of experimental
errors on the model, D. Besson et J. Dimnet , LBM
14h40 Ergonomic model of inferior member, E. Karabinova, L Chèze et J
Dimnet, LBM Lyon
15h00 Break and visit of the exhibition
15h30 3D digitizing a detail of the human body in a virtual reality
context, N. Thalmann - MIRALAB, University of Genève.
16h30 Mathematical 3D digitizing of a model used in the road reglementation
for road security, F. Bermond, Bouquet, Ramet, Caire - INRETS
17h00 3D digitizing of the human head by finished elements method
        M. Willinger - LABORATOIRE DES SYSTEMES BIOMECANIQUES - STRASBOURG
17h30 Debate and conclusion of the congress

For any registration or further information, please complete the voucher
below and send it to :
Nelly PLENCHETTE - HARBOUR - BP 15 - 35801 Dinard cedex - Tél : 33 (0)2 99
16 35 33 - Fax : 33 (0)2 99 16 35 34
Email : numerisation@numerisation3d .com - Site Web :
http://www.numerisation3d.com
NAME SURNAME POSITION
COMPANY ADDRESS
P.C. TOWN COUNTRY
TEL FAX EMAIL
ACTIVITY

I would like to
( register to the Congress NUMERISATION 3D 98
( 2 days, at the price of 3 400 F excl vat., or 4 100,40 F inc vat
(including the proceeding book and the pauses)
( 1 day, at the price of 2 200 F excl vat., or 2 653,20 F inc vat
(including the proceeding book and the pauses)

        ( wednesday 27th May 1998 ( Thursday 28th May

( have lunch at the UIC, at the price of 182.42 F excl vat., or 250 F inc
vat per meal and per person
        ( wednesday 27th May 1998 ( Thursday 28th May

( order the proceedings book at the price of 750 F excl vat; or 904.50 F
inc vat
Please find enclosed the payment of
......................................... FF

( receive an invitation card to visit the exhibition

************************************************************************
 Herve de Baillenx,Multistation S.A. E-Mail:debaillenx@multistation.com
 TEL : 33 (0)2 99 16 35 35 FAX : 33 (0)2 99 46 41 41
 WEB : <htpp://www.multistation.com> Home Fax : 33 (0)1 39 71 72 94
************************************************************************

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:45:37 EEST