Hi Yannick,
I can only provide you with a product description of LOMComposite.
Snip(Infos from Helisys data sheet)
The base material is a layer of nonwoven, randomly-oriented glass fibers
with two special coatings. The lower surface is finished with a
thermosetting epoxy, while a thin cover of a proprietary acrylic is
applied onto the upper surface.
Material Strengh: nine times stronger than LOMPaper
Operating temperature: maximum 2000F statically and 5000F dynamically
moisture resistance: less than 0.4% Z growth under 90% humidity withour
sealing.
Sample Applications: Plaster casting patterns, green sand casting
patterns, Thermoforming molds, Underwater test parts, Form, fit and
functional tests, Prototype injection molding.
Please remember I give this information as it is!!! Hope this helps.
Regards
Kai
________________________________________________________________________
Kai Uwe Koch E-Mail: kuk@ipa.fhg.de
Internet: http://www.ipa.fhg.de/
Fraunhofer-Institut
Produktionstechnik und Automatisierung
Nobelstrasse 12
D-70569 Stuttgart Phone: +49 711 970 1856
Germany Fax: +49 711 970 1004
________________________________________________________________________
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:45:43 EEST