Dear sir:
Could you tell me its web site for me to refer?
Thanks
Jiao xiangdong
On Thu, 8 Oct 1998, Ross Gates wrote:
> We have found a source to do rapid tooling for plastic injection molds
> that can handle larger sizes than the Keltool process. I believe they go
> up to 24 inches by 24 inches and can produce a core or cavity up to
> 1,900 pounds. They use a similar process as Keltool, but make a ceramic
> intermediate tool. They have a choice of 13 tooling material, such as
> P-20, H-13, and stainless steel. I had seen a mold they built for a farm
> tractor tire. It consisted of about 15 large segments and had the tread
> pattern and all the little vents in it. Their delivery time is about a
> week. They have experience working with STL masters.
>
> The company is:
> Sarcol Inc.
> 3050 West Taylor St.
> Chicago, IL 60612
> 313 533-3000
> 313 533-3004 FAX
> Contact: Jim Larson
>
> Disclaimer: I have no interest in this company other than as a vendor.
>
> Ross Gates
> Select Mfg. Services Inc.
>
>
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:46:52 EEST