Jarvela,
What you're proposing will be extremely difficult, if not impossible. It's
much easier to create the tool paths directly from the STL file with a program
like Deskproto.
Steve
On Oct 16, 4:02pm, Jarvela wrote:
> Subject: machining from .stl files
> What is the best method to create machine code from .stl files. I've
> considered converting the .stl file to an iges file and import into a
> cad/cam package such as pro e and go from there. Any better
> suggestions?
>
>
>
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>-- End of excerpt from Jarvela
-- Steve Farentinos PML, Inc. 201 W. Beach Ave. Inglewood, CA 90302 310 671-4345 310 671-0858 Fax 310 671-1862 BBS steve@pmli.comFor more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:46:55 EEST