Have a look at
http://www.biba.uni-bremen.de/projects/hyprform/shemet.html
It is not that new any more (1996), but I know that my good old BIBA
institute in Bremen has been continuing their work on this subject.
Juergen
Juergen Bauer, Siemens AG, EC CS A PD
E-Mail: Juergen.Bauer@spy.siemens.de
Adress: Siemensstr. 13, 67346 Speyer, Germany
Phone: +49-6232-30-2501; Fax -2110
http://www.siemens.de/ec/eccs/auto/index.htm
----Original Message-----
From: G.Sriram, BayState Infotech, Chennai
[SMTP:baystate@giasmd01.vsnl.net.in]
Sent: Monday, March 29, 1999 8:26 AM
To: rp-ml@bart.lpt.fi
Subject: Secondary Tooling - Sheet Metal
Dear RP-ML subscriber,
Thanks a lot for the response you had sent on the above subject.
I should have described the problem at hand descriptively.
We need the following
1)Information on Sheet metal tooling applications using RP.
2) Brakes Industries /case studies using RP.
Currently our client produces Sheet metal component using CNC made
punch & Dies in 6-8 operations.
We would like to know if RP made Punch and Dies ( by
coating with metal or by treating it)can be used in sheet metal
operations. (Issues : i) Pressure ii) Material properties iii)
Geometric details)
Thanks in advance.
Regards
________________________________________
G.Sriram
BayState Infotech
16 Ram Colony, West Mambalam
Chennai - 600 033.
India
Tel# 91-44-4899908/4853462
Fax# 91-44-4899908
E-mail : baystate@vsnl.com
Web Site: http://www.baystate-india.com/
__________________________________________
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:51:22 EEST