More information on PowerMILL is available on Delcam's web site
http://www.delcam.com
PowerMILL will machine STL models as a standard feature.
PowerMILL can be supplied in a number of different configurations,
but I guess this is not the place to present these so
if you want more information feel free to fill in the
'Contact Us' form on the Web site!
Ed
-------------------------------------------------
Ed LAMBOURNE Delcam plc
Technical Director Small Heath Business Park,
ebl@delcam.com Birmingham, B10 0HJ, UK
Tel:+44(0)121-766-5544 Fax: +44(0)121-766-5511
http://www.delcam.com Mobile: +44 (0)7775 642817
-------------------------------------------------
> -----Original Message-----
> From: owner-rp-ml@ltk.hut.fi
> [mailto:owner-rp-ml@ltk.hut.fi]On Behalf Of
> Terry T. Wohlers
> Sent: 13 May 1999 00:48
> To: Brad Fox
> Cc: RP-ML
> Subject: High speed machining from STL's
>
>
> Brad Fox wrote:
>
> > I'm looking for some good feedback on high speed machining
> off of STL
> files.
> > Is DeskProto the only software available that is generating
> cutter paths
> off
> > STL's? Any others people would comment on?
>
> PowerMill from Delcam also does a fine job at producing tool
> paths from STL
> data. Less than a year ago, the company had planned to roll
> out a product
> called PowerMill Express for ~$10K, as I recall, and its main
> purpose was
> to import and work with STL data. I have not heard whether
> the company
> introduced the product. Does anyone know?
>
> Terry
>
> **********************
> Terry Wohlers
> Wohlers Associates, Inc.
> OakRidge Business Park
> 1511 River Oak Drive
> Fort Collins, Colorado 80525 USA
> 970-225-0086
> Fax 970-225-2027
> twohlers@compuserve.com
> www.WohlersAssociates.com
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:51:42 EEST