Dan,
We don't have to reset for every build. I suggest you call 3D Systems
and find out why your having this problem.
Jim
James P. Harrison Director Of Operations
3Dimensional Engineering www.3de.net; harrjp@juno.com
2991 N. Powerline Rd. Pompano Beach, FL. 33069
954-972-9906 (phone) 954-972-8903 (fax)
On Wed, 9 Jun 1999 09:51:26 +0800 DANIEL CHARLES DAVIS
<DANIEL@proton.com.my> writes:
>Paul,
>
>It works well using BS 4.1.1 and a Pentium-based controller. The only
>caveat is that you must turn on this option with EVERY build. There
>is
>no way to default the pager option to work with every build (or
>perhaps
>I should say that we don't know how). Also be aware that you may want
>to change the <number or retries> to 1. Otherwise, the default is 3
>and
>it will page you 3 times!
>
>The use of this option is not advised with a 486 controller per 3D
>Systems.
>
>Basically to configure it, load a BFF file, go to the <Setup> pulldown
>menu and choose <Telephone>. There is also a button one can add to the
>toolbar for a shortcut (found at <View>:<Toolbars>:Telephone). Check
>the
>appropriate boxes, add in the pager phone numbers and you're ready to
>go.
>
>Of course, be sure that you or your 3D FSE (recommended as the
>controller is very fussy) have added & set up a modem, as the SLA500
>doesn't come with one as standard equipment.
>
>Let me know if you need any more help. Cheers!
>
>
>---
>Regards,
>Dan Davis
>PROTON Rapid Prototyping & Manufacturing Center
>Hicom Industrial Estate, Batu Tiga, PO Box 7100
>Shah Alam, 40918 Selangor MALAYSIA
>+60 3 515-2380 phone/fax
>http://www.protoncar.com/rapid/index.htm
>
>
>> -----Original Message-----
>> From: Sales & Quoting office [SMTP:sales@santineng.com]
>> Sent: Wednesday, June 09, 1999 3:42 AM
>> To: DANIEL CHARLES DAVIS
>> Subject: Pager
>>
>> Daniel,
>>
>> I was going through the old rpml postings and I saw that you were
>> inquiring about the pager options for the 500.
>> Did you ever get that up and running? How did it work out?
>> We are thinking about using it ourselves.
>> Any help would be appreciated.
>>
>> Thanks
>>
>> Paul
>> Santin Engineering
>
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:51:51 EEST