Hi Guys,
Are you having a problem with autoplacement? When I use this button, it
flips the parts in all sorts of directions. Most of the time they are not
the preferred orientation. I do not know of a way to keep them from
rotating either. I must continue to use Magics for this need. I hope they
address this in the updates.
Bob York
Thomson Consumer Electronics
-----Original Message-----
From: James P. Harrison [mailto:harrjp@juno.com]
Sent: Wednesday, October 20, 1999 4:44 PM
To: KDenton@williams-int.com
Cc: rp-ml@bart.lpt.fi
Subject: Re: Small frustrating thing with Lightyear
Hey Karl,
I still use Solidview for most of that type of work. I have noticed a
few problems
like that. I only use Lightyear to create supports and slice, and that
is frustrating
enough.
Good Luck,
Jim
James P. Harrison e-mail: harrjp@juno.com
Director Of Operations Phone: 954-972-9906
3Dimensional Engineering Fax: 954-972-8903
2991 N. Powerline Rd. Web: www.3de.net
Pompano Beach, FL. 33069
On Wed, 20 Oct 1999 14:14:52 -0400 KDenton@williams-int.com writes:
> Hello All,
>
> I have all but worked out the bad things with Lightyear and found
> one other
> item that could be frustrating. After setting up a build that had 8
> parts
> on it I went to print the image and info on each part and it only
> printed 2
> pages, the first was the image and the second was the data on three
> of the
> stl files. The remaining data never came. I went to the print
> preview
> screen and sure enough they did exist yet when I went to print the
> remaining
> 2 pages ( pages 3 and 4 in my case) it gave me a message that the
> number
> entered was outside the usable range!
>
> Has any body else had this trouble? Do we need an advanced
> "printer"
> license to go beyond 2 pages? Looking for comments...
>
> Karl
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:53:06 EEST