Re: Small frustrating thing with Lightyear

From: Scott -Scooter- Sutterer (ssutter@pdmfg.com)
Date: Thu Oct 21 1999 - 22:15:17 EEST


Are you talking about on a 250
----- Original Message -----
From: <bolson@molex.com>
To: <rp-ml@bart.lpt.fi>; <KDenton@williams-int.com>
Sent: Thursday, October 21, 1999 12:55 PM
Subject: Re: Small frustrating thing with Lightyear

> I don't know if we were the last to find out but, the software still
> can't handle more the 20 parts.
>
> Bob
>
>
> ______________________________ Reply Separator
_________________________________
> Subject: Small frustrating thing with Lightyear
> Author: KDenton@williams-int.com at INTERNET
> Date: 10/20/99 2:14 PM
>
>
> Hello All,
>
> I have all but worked out the bad things with Lightyear and found one
other
> item that could be frustrating. After setting up a build that had 8 parts
> on it I went to print the image and info on each part and it only printed
2
> pages, the first was the image and the second was the data on three of the
> stl files. The remaining data never came. I went to the print preview
> screen and sure enough they did exist yet when I went to print the
remaining
> 2 pages ( pages 3 and 4 in my case) it gave me a message that the number
> entered was outside the usable range!
>
> Has any body else had this trouble? Do we need an advanced "printer"
> license to go beyond 2 pages? Looking for comments...
>
> Karl
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:53:07 EEST