Hi Ray,
We have received such error messages as "Problem to build discretization". and
by inputting the following sag and maximum triangle values you should be able to
avoid these problems in the future. I believe it's a problem with the accuracy
of the surface you wish to create but I could be wrong. We are currently
producing STL files from Catia 4.21 without any problems
Sag value 0.02mm
Maximum triangle size 20mm.
I hope this is of some help to you.
All the best,
Derek Harrell
Worthing Technical Centre
England
"TAN CHOR ANN, RP" <TANCA@proton.com.my> on 01/02/2000 05:01:04
To: rp-ml@bart.lpt.fi
cc: (bcc: Rapid Prototyping/Daewoo)
Subject: Off topic: CATIA workaround
Dear list,
A question for those CATIA users out there: I seem to get this error message
rather often when converting a .model file to stl format:
" Problem to build discretization"
Any workaround this?
Another thing...what's the best parameter settings for Maximum size of
triangles and Maximum sag?
Thanks for your help in advance.
cheers,
raymond tan
============================================================
Disclaimer Note:
"This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
This communication may contain material protected by intellectual property
rights laws. If you are not the intended recipient or the person responsible
for delivering the email to the intended recipient, be advised that you have
received this email in error and that any use, dissemination, forwarding,
printing, or copying of this email is strictly prohibited. If you have
received this email in error please notify the System Administrator at
administrator@proton.com.my "
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:02:44 EEST