Re: SV: test parts, better version

From: Alain BERNARD (alain.bernard@cran.u-nancy.fr)
Date: Fri Feb 04 2000 - 13:20:56 EET


Dear All,

some of my students are doing a study in order to compare the different
parts used by RP manufacturers.
They have also some bibliographic references on some academic works but
when I see the list, we have exactly the same !...
We will publish the results of our current study and propose a tentative of
universal test part (this is a first tentative !) in order to federate the
possibility of normative process of reception of machine.
Some also will work on the control process of the part.

Best Regards,

Prof. A. BERNARD

A 09:05 04/02/00 +0100, vous avez écrit :
>Dear list - sorry for sending this twice, I slipped on the keyboard and the
>first one got away too early.
>
>
>Michelle,
>
>Here are some:
>
>Aubin, R.F.: A World Wide Assessment of Rapid Prototyping Technologies
>UTRC Report No. 94-13 initiated by the Intelligent Manufacturing Systems IMS
>Test Case on Rapid Product Development
>
>Juster, N.P. & Childs, T.H.C.: A Comparison of Rapid Prototyping Processes
>Proceedings of 3rd European Conference on Rapid Prototyping and
>Manufacturing, Nottingham,
>
>Iuliano, L., Ippolito R. & de Filippi, A.: A New User Part for Performances
>Evaluation of Rapid Prototyping Systems
>Proceedings of 3rd European Conference on Rapid Prototyping and
>Manufacturing, Nottingham
>
>Reeves, P.E. & Cobb, R.C.: Surface Deviation Modelling of LMT Processes - a
>Comparative Analysis
>Proceedings of 5th European Conference on Rapid Prototyping and
>Manufacturing, Helsinki
>
>Farentinos, S. & Khoshnevis, B.: A Study of accuracy in Automated
>Fabrication
>http://www.pmli.com/accuracy_study.html
>
>Loose, K. & Nakagawa, T.: Benchmarking Various Methods of
>Layer-Manufacturing Systems in Rapid Prototyping
>(I don't have the full reference on this one)
>
>
>It would be appreciated if you publish a summary of all the references that
>you receive, this seems to be a matter of perennial interest.
>
>Regards
>Berndt Holmer
>IVF (The Swedish Institute of Production Engineering Research)
>Brinellvagen 68
>SE-100 44 Stockholm
>Sweden
>Ph: +46 8 213174
>Fx: +46 8 210851
>www.ivf.se
>
>
>
>
>> ----------
>> Från: Michelle Soltysik[SMTP:mds162@psu.edu]
>> Skickat: den 4 februari 2000 05:24
>> Till: Rapid Prototyping Mailing List
>> Angående: test parts
>>
>> Dear RP list,
>>
>> Does anyone know of any technical papers, websites, articles, etc. which
>> discuss or describe parts that were created specifically to test or
>> compare
>> the dimensional accuracy of different RP systems?
>>
>> Thank you in advance,
>> Michelle Soltysik
>>
>> Michelle D. Soltysik
>> Dept. of Industrial & Manufacturing Engineering
>> The Pennsylvania State University
>> 310 Leonard Building
>> University Park, PA 16802
>> Fax: (814) 863-4745
>>
>>
>> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>>
>>
>>
>
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
>
------------------------------------------------------------------------
Prof. Alain BERNARD Tel : + 33 (0)3 83 91 27 29
Professeur des Universites + 33 (0)3 83 91 20 09
CRAN ESA CNRS 7039 Fax : + 33 (0)3 83 91 23 90
UHP Nancy I - ESIAL
BP n° 239, 54506 - VANDOEUVRE Cedex - FRANCE
e-mail : alain.bernard@cran.u-nancy.fr http://www.cran.u-nancy.fr
------------------------------------------------------------------------

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:02:46 EEST