AR, JC, et al:
Geomagic Wrap automatically takes the point cloud into a polygonal mesh
(STL). ($6K)
Geomagic Shape can automatically transform the polygonal mesh (STL) into
NURBS surfaces (IGES), while allowing the user to retain full control of the
final output. ($15K)
Geomagic Studio, the complete solution from point cloud to NURBS, retails
for $20K.
Anyone who wishes to continue this dialog off line, please call me or take a
look at our web site. http://www.geomagic.com
Diana Borja
919-474-0155
-----Original Message-----
From: owner-rp-ml@bart.lpt.fi [mailto:owner-rp-ml@bart.lpt.fi]On Behalf
Of Anshuman Razdan
Sent: Wednesday, March 01, 2000 10:23 AM
To: 'James Carruthers'; 'RP-ML List'
Subject: RE: STL to IGES software?
There is nothing automated per se but Surfacer (imageware), Geomagic Wrap
and Paraform are three good software each with different skill level
requirement and quirks. They all cost 15-25K each
AR
-> -----Original Message-----
-> From: owner-rp-ml@ltk.hut.fi
-> [mailto:owner-rp-ml@ltk.hut.fi]On Behalf Of
-> James Carruthers
-> Sent: Wednesday, March 01, 2000 7:04 AM
-> To: RP-ML List
-> Subject: RE: STL to IGES software?
->
->
->
-> >
-> > Dear rp-ml:
-> >
-> > I desperately need to find a demo or shareware program
-> that will cleanly
-> > convert stl files
-> > to IGES files for a 3-D assembly tolerancing simulation research
-> > project I'm
-> > doing.
-> > Any ideas?
-> > Any leads would be appreciated.
-> >
->
-> Well, as long as you're not talking about automatically
-> converting an STL
-> mesh into a nice part, the Rhino demo(www.rhino3d.com) could
-> do it--it'll
-> convert every polygon into a little surface.
->
-> That reminds me, I'm curious about the software that's
-> available that does
-> claim to able to fit NURBS surfaces to meshes or point
-> clouds. How well they
-> work, how much they cost.
->
-> Jim
-> -------------------------------------------------------------
-> ---------
-> James Carruthers
-> Hydraulic Design
-> 613-851-9270
-> http://www.hydraulicdesign.net
-> mailto:jim@hydraulicdesign.net
-> -------------------------------------------------------------
-> ---------
->
->
-> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:02:56 EEST