RE: Sealing FDM Parts - Wrap-up

From: SiderWhite (SiderWhite@worldnet.att.net)
Date: Fri Mar 31 2000 - 10:32:50 EEST


Or check out www.por15.com
They have a whole line of various sealers....
I believe Eastwood probably buys from these people.

-Glenn Whiteside

----- Original Message -----
From: <Robert_J_Schneider@email.whirlpool.com>
To: 'rapid' <rp-ml@bart.lpt.fi>; Mitchell; Douglas (D.B.)
<dmitchel@ford.com>
Sent: Wednesday, March 29, 2000 10:15 AM
Subject: Re: Sealing FDM Parts - Wrap-up

> Don't forget gas tank sealer. Eastwood Co. has a kit (10165Z) for
> cleaning and sealing old steel gas tanks. www.eastwoodcompany.com.
> Or I'm sure J.C. Whitney has something too.
>
>
> ______________________________ Reply Separator
_________________________________
> Subject: Sealing FDM Parts - Wrap-up
> Author: "Mitchell; Douglas (D.B.)" <dmitchel@ford.com> at INTERNET
> Date: 3/29/2000 9:03 AM
>
>
> Hello all,
>
> A couple of weeks ago, I requested input on ways to seal FDM parts
> to protect them against gas/petrol infiltration and melting. To
> summarize the responses:
>
> 2 part epoxy/resin paint
> Model airplane dope
> CeRam-Kote 54 from CeRam Kote (http://www.ceram-kote.com)
> Fluorinated Polyurethane (FPU) Coating from 21st Century Coatings
>
> And I have thought of another way that I plan on testing. Coat
> the FDM part with SLA resin and cure it. Hey, it's worth a try.
>
> Thanks for all the responses.
>
> --
> Doug Mitchell
> Ford Motor Company
> mailto:dmitchel@ford.com
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:09 EEST