Re: PVC Film

From: RW Coleman (rwcoleman@ghg.net)
Date: Fri Mar 31 2000 - 19:34:21 EEST


Try Leathertone Inc. in Woonsocket, RI 800-345-2561
They do custom lamination of PVC even in small quantities at reasonable
prices.
Good Luck,
Richard Coleman
Coleman and Associates
http://www.coleman-associates.com

Andy Cline wrote:

> Hello everyone..
>
> This is probably the first time I am posting something to the rpml
> though I am a regular reader of all emails.
>
> Please excuse me if I am a bit off topic.
>
> I need to source a kind of PVC film very urgently.
>
> I am writing the specs below. Anyone with any info please respond.
> Thanks in advance.
>
> Best regards
> Andy
>
> Specification:
>
> Vinyl Sheeting of Polymers of Vinyl Chloride Flexible White/Black
> laminated with the following specification;
>
> 1. Color : Inner Black, Outer white or light grey
> 2. Surface : Matt or Satin, suitable for RF welding
> 3. Optical Transmission Density : Above 5.0 - Should be opaque
>
> 4. Dimension (width)
>
> a. Tear Strip : 38 +/- 5mm
> b. Under Side : 38 +/- 5mm
> c. Back Surface : 60 +/- 2mm
> d. Thickness
> 1. Tear Strip : 195 +/- 5 Mic.
> 2. Under Side : 195 +/- 5 Mic.
> 3. Back Surface : 195 +/- 5 Mic.
>
> 5. General
>
> The PVC film should be wound over cardboard core of 75 mm inner
> diameter. The maximum diameter of roll is to be 450 mm. The rolls are
> to be packed in dust free polyethylene bags of suitable gauge.
> Please email us atekcoplastics@usa.netFax: 1 810 454 0211For more
> info please visit
>
> www.therapidsolution.comUpdated on March 25, 2000. Please send in
> your comments.You can also email us directly for your questions.
>
>
> INDUSTRIAL DESIGN - MECHANICAL PRODUCT DESIGN - RAPID PROTOTYPING AND
> TOOLING - MOLD MAKING AND MOLDING. For more information about the
> rp-ml, see http://ltk.hut.fi/rp-ml/

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:10 EEST