Tim,
This is not a "Catia" problem; it is a data problem. If one has not made a
complete volume in CATIA or has not done so with a tight enough model
tolerance
it won't be stitched in SolidWorks. The standard model tolerance Solid
Works uses is 15x tighter than CATIA's default.
The problem should be resolved from the CATIA side.
_________________________________________________________________________
Bruce Okkema, President
Eagle Design & Technology, Inc.
2437 84th Avenue
Zeeland, MI 49464
Ph: 616-748-1022 Fx: 616-748-1032
email: bruceo@eagledesign.com
web: eagledesign.com
-----Original Message-----
From: owner-rp-ml@ltk.hut.fi [mailto:owner-rp-ml@ltk.hut.fi]On Behalf Of Tim
Rhinehart
Sent: May 05, 2000 9:15 AM
To: RP Mailing List
Subject: Catia to Solidworks
Dear list,
We are having problems bringing a Catia file into Solidworks. The file does
not always come through as a solid.
Has anyone else experienced a problem like this?
Any help would be greatly appreciated.
Tim Rhinehart
Ralph S. Alberts Co., Inc.
60 Choate Circle
Montoursville, PA 17754
(570) 368-6653
Fax (570) 368-6353
rsalbert@microserve.net
www.microserve.net/~rsalberts
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:25 EEST