RE: CANNED STL TO CNC

From: Anshuman Razdan (razdan@asu.edu)
Date: Sun May 07 2000 - 00:34:14 EEST


Also, Delft Splines software DeskProto will accept it. We have used it in
our lab.

AR

---------------------------------
Dr. Anshuman Razdan
Technical Director PRISM
Email: razdan@asu.edu
http://prism.asu.edu/~razdan
MC 5106 Arizona State University
Tempe AZ 85287-5106
Phone: (480) 965 5368
Fax: (480) 965 2910

-> -----Original Message-----
-> From: owner-rp-ml@ltk.hut.fi
-> [mailto:owner-rp-ml@ltk.hut.fi]On Behalf Of
-> NECOINC@AOL.COM
-> Sent: Saturday, May 06, 2000 8:27 AM
-> To: rp-ml@bart.lpt.fi
-> Subject: RE: CANNED STL TO CNC
->
->
-> FOLKS
-> IS THERE ANY CANNED FILE CONVERTER PROGRAMS TO CONVERT STL
-> FILES TO SOME TYPE
-> OF G-CODE OR USABLE CODE TO RUN A RP MACHINE. WE WOULD LIKE
-> TO BUILD FOR
-> INTERNAL USE ONLY LARGER RP MACHINES SO THAT WE CAN MAKE VERY LARGE
-> PROTOTYPES, LARGER THAN WHAT IS ON THE MARKET.
->
-> John Irvin, President
-> NECO Incorporated
-> 3901 Nome Street, Unit 3
-> Denver, CO 80239
-> Ph 303 574 1077
-> Cell 303 668 1663
->
-> We will find a way or Make one
->
-> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:26 EEST