Solid View is also another solution to do this. Export the ProE file into
IGS which contain the Surfaces, then import it into Solid View, after that ,
output into STL.
-----Original Message-----
From: Andreas Mueller [mailto:andreas.mueller@iwb.tum.de]
Sent: 2000年5月23日 21:55
To: RP Mailing List
Subject: bad ProE to stl?
hello everyone,
a customer asked me, how to export a bad Pro Engineer part to a
stl-part.
he wasn't able to do so in ProE because of several problems with
surfaces and edges.
there is no chance to repair the ProE part completly in time (1000
features).
has anybody of you had a similar problem in the past? are there any
tools which can import a bad ProE or iges-part and exports this as a
stl-part in a better way than ProE does? there is no need to have a
perfect stl-file, because the rp-part would be scaled down, which means
that small features wouldn't be buildt, anyway.
thanks in advance,
Andreas
-- Dipl.-Ing.(FH) Andreas Müller | Phone: +49-821-56883-45 iwb Anwenderzentrum Augsburg | Fax: +49-821-56883-50 Otto-Lindenmeyer-Str. 30b | mailto:andreas.müller@iwb.tum.de 86153 Augsburg |For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:34 EEST