Dear Andreas
Delcam offer a wide variety of tools to help people with these problems
Direct translators, PS-Exchange, to enable you to import native data from
systems
such as ProE, CATIA, UG etc (these are currently available free and can be
downloaded from www.delcam.com) as well as tools to help you fix the cad
data and the stl mesh, PowerSHAPE & Trifix. An eval version of PowerSHAPE
can also be downloaded from www.delcam.com.
For more info on RP solutions see
http://www.delcam.com/trifix/trifix.htm
There are more than a dozen RP case studies also available form
http://www.delcam.com/info/info1.htm
Chris Lawrie Product Marketing Manager
Delcam Plc Email cl@delcam.com
Talbot Way Tel +44 121 766 5544
Small Heath Fax +44 121 766 5511
Birmingham Mob: +44 (0)411 353330
B10 OHJ, UK www.delcam.com
-----Original Message-----
From: owner-rp-ml@bart.lpt.fi [mailto:owner-rp-ml@bart.lpt.fi] On Behalf
Of Andreas Mueller
Sent: 23 May 2000 14:55
To: RP Mailing List
Subject: bad ProE to stl?
hello everyone,
a customer asked me, how to export a bad Pro Engineer part to a
stl-part.
he wasn't able to do so in ProE because of several problems with
surfaces and edges.
there is no chance to repair the ProE part completly in time (1000
features).
has anybody of you had a similar problem in the past? are there any
tools which can import a bad ProE or iges-part and exports this as a
stl-part in a better way than ProE does? there is no need to have a
perfect stl-file, because the rp-part would be scaled down, which means
that small features wouldn't be buildt, anyway.
thanks in advance,
Andreas
-- Dipl.-Ing.(FH) Andreas Müller | Phone: +49-821-56883-45 iwb Anwenderzentrum Augsburg | Fax: +49-821-56883-50 Otto-Lindenmeyer-Str. 30b | mailto:andreas.müller@iwb.tum.de 86153 Augsburg |For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:34 EEST