Tom
If you need a more advanced CAM solution check out Delcam's PowerMILL
product on www.powermill.com or www.delcam.com. PowerMILL is well geared for
handling complex shapes with advanced machining strategies.
Regards
Chris Lawrie
Chris Lawrie Product Marketing Manager
Delcam Plc Email cl@delcam.com
Talbot Way Tel +44 121 766 5544
Small Heath Fax +44 121 766 5511
Birmingham Mob: +44 (0)411 353330
B10 OHJ, UK www.delcam.com
-----Original Message-----
From: owner-rp-ml@bart.lpt.fi [mailto:owner-rp-ml@bart.lpt.fi] On Behalf
Of Tom Richards
Sent: 07 June 2000 09:11
To: Lilian Mac
Cc: rp-ml@bart.lpt.fi
Subject: Re: 3D STL MAchining software
Lillian: I just bought a used Light CNC desktop miller; enroute to me as we
speak. I need good but economical CNC milling software too, for more than
just pocketing and drilling. I also need to machine complex surfaces from 3D
CAD files of parts. Please keep in touch.
At 12:09 PM 6/6/00 PDT, you wrote:
>Has anyone had any experience with millwizard, Delcam's
>3D CNC machining software? The software appears to be a
>free download and it can certainly load and machine my
>STL models.
>
>I'm using a MicroMill CNC machine to cut plastic prototypes
>that are approx. 100mm square.
>
>See,
>
>http://www.millwizard.com
>
>Thanx. L.
>________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
>
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:38 EEST