Dear Erkut,
We would be happy to supply you with vacuum cast parts or injection molded
parts using epoxy tooling at Protoform(R) North America. However, since we
would need to have SLA casting masters made for each part to build tooling,
you are probably wise to go with RP parts for your quantity of two
requirement if you can match the properties of ABS.
Please keep us in mind in the future as a source for quality vacuum cast
prototypes and injection molded prototypes (50-1000) using Space Puzzle
Molding at competitive prices. See our web site
(http://www.protoformna.com) for more details or feel free to contact me.
-- -DougDouglas A. VanPutte Senior Sales Representative Protoform(R) North America 18 Cross Bow Drive Rochester, NY 14624-4710 Tel: 716-889-3601 Fax: 716-889-7335 Cell: 716-329-1308 Email: vanputtd@frontiernet.net Web: http://www.frontiernet.net/~vanputtd
-- -Doug
Douglas A. VanPutte Consultant & Manufacturers' Agent Cross-Bow Rapid Tool Associates, Inc. 18 Cross Bow Drive Rochester, NY 14624-4710 Tel: 716-889-3601 Fax: 716-889-7335 Cell: 716-329-1308 Email: vanputtd@frontiernet.net Web: http://www.frontiernet.net/~vanputtd
---------- >From: "Erkut Negis" <erkut@innotek.com.tr> >To: <rp-ml@bart.lpt.fi> >Subject: Attn. RP Service Bureaus: Quotation needed... >Date: Thu, Jun 15, 2000, 8:36 AM >
> > We urgently (as all other customers) need prototype parts of a vacuum > cleaner including the upper and lower shells, controls, handle, switches, > cable roller, microfilter screens, etc. The prototypes will be used for > functional testing so, material properties should be similar to ABS. The > prototypes may directly be fabricated via SLA using SL 5520 or Somos 8110 > resin? Another option is vacuum casting however this could be costly for us > because we will not need more than two prototype for each part. > Laser sintering process (DTM or EOS) can also be suitable especially for > smaller parts. We do not prefer FDM because the product should be water > resistant however FDM technology may be used to build masters for silicon tooling. > > Initially we need two copies of a part which has a Diameter of 300mm and H: 200mm. > > Keeping in mind the above requirements/ constraints please contact me for > additional discussion and afterwards I can send 3D part data to you. > > Regards > > > ------------------------------------ > Erkut Negis > erkut@innotek.com.tr > > INNOTEK, > Innovative Technology & Products, > Engineering & Int'l Trade Co. Ltd. > > Basaksehir B32/4 34670 ikitelli > istanbul TURKEY > > URL : www.innotek.com.tr > Phone : +90 (212) 485-4747 > Mobile: +90 (532) 220-7664 > Fax : +90 (212) 485-4748 > -------------------------------------- > > > > For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/ >
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:42 EEST