RE: STL or IGES file required....

From: David B. Thomas (dbthomas@geomagic.com)
Date: Wed Jun 21 2000 - 21:44:44 EEST

Hello, Allan:

We have an STL file of a foot created in Geomagic Studio from a scanned
point cloud. It's in the download section of our web site. Go to
http://www.geomagic.com/support/ and click on "downloads." You'll be asked
to register (quick and painless), and then you can download a number of
organic and mechanical models.

Best regards,

Dave

David B. Thomas
Marketing Communications Manager
Raindrop Geomagic, Inc.
PO Box 12219
Research Triangle Park, NC 27709

919.474.0129 phone
919.474.0216 fax
919.306.5592 mobile

email dbthomas@geomagic.com
http://www.geomagic.com

Look for us at SIGGRAPH 2000 July 23-28, 2000
New Orleans, Louisiana USA
http://www.siggraph.org/s2000/

-----Original Message-----
From: owner-rp-ml@bart.lpt.fi [mailto:owner-rp-ml@bart.lpt.fi]On Behalf
Of Allan Rennie
Sent: Wednesday, June 21, 2000 12:18 PM
To: rp-ml@bart.lpt.fi
Subject: STL or IGES file required....

Greetings all,

I'm after either an STL or an IGES of a foot (not 12 inches, but the
thing at the end of your leg).

Anyone got one or know where I can find one?

Thanks in advance,

Allan. 

--
Allan E W Rennie
Research Engineer
Centre for Rapid Design and Manufacture
Buckinghamshire Chilterns University College
Queen Alexandra Road
High Wycombe
Bucks HP11 2JZ

Tel: +44 (0)1494 605085
Fax: +44 (0)1494 538593
Email: allan.rennie@bcuc.ac.uk

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:43 EEST