Re: Delcam units

From: NGeorge (NGeorge@Cymro-Jewelworks.com)
Date: Wed Jul 12 2000 - 17:36:28 EEST


Puneet,
The SFM of the material to be cut is M/Min and Feeds are MM/Min. If you ran
M/Min you would be feeding 1000 times faster than you should.
Best Regards.
Neil George

Puneet Tandon wrote:

> Hello List
>
> There is a small query. In the Delcam's PowerMILL, the cutting speed, feed
> rates etc. are to be inputted as units/min. Can anyone tell me what is the
> meaning of units? Is it mm/min or m/min or something else.
>
> Thanks in advance
> Puneet
> ====================================================================
> Puneet Tandon
> Research Scholar
> C/o Dr. Sanjay G. Dhande
> CAD-P LAB
> Indian Institute of Technology
> Kanpur. 208 016
> INDIA.
> Tel: +91-512-597838 Fax:+91-512-597180
> +91-512-597302
>
> E-mail : puneett@iitk.ac.in
> : ptandon@mailcity.com
> : tandon_p@hotmail.com
>
> ====================================================================
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:49 EEST