Yes. I have already used this information. I am looking to change resins
in my machines (SLA 5000 w/SL5510 and a SLA 250/50 w/SL5170) I have been
able to ask users what they think of the resins I am prospecting. Thanks
for the great information! I did kinda freak when I came in after having
today off and found 80 + emails in my RP-ML basket, I only took me a few
minutes to sort out what I did not want.
Cheers
Scott Sutterer
----- Original Message -----
From: "Alex Salvi" <ASalvi@MMCCINC.COM>
To: "Rapid Prototyping Mailing List (E-mail)" <rp-ml@bart.lpt.fi>
Sent: Tuesday, July 25, 2000 12:22 PM
Subject: RE: Roll Call
> Sorry but I agree with Sreenath,
> enough is enough, is somebody actually going to use this information?
> Alex
>
>
> > -----Original Message-----
> > From: Paul Bordner [mailto:rpml@laserrepro.com]
> > Sent: Tuesday, July 25, 2000 12:33 PM
> > To: Sreenath
> > Cc: 'rp-ml'
> > Subject: RE: Roll Call
> >
> >
> > Obviously it is of interest to us all. Hats off to Bob York
> > for starting
> > this. Thank you for generating contacts and info for the future.
> >
> > Paul
> >
> > -----Original Message-----
> > From: owner-rp-ml@ltk.hut.fi
> > [mailto:owner-rp-ml@ltk.hut.fi]On Behalf Of
> > Sreenath
> > Sent: Tuesday, July 25, 2000 11:11 AM
> > Cc: 'rp-ml'
> > Subject: Re: Roll Call
> >
> >
> > Ooooooooh God,
> > Please stop this 'Roll Call' chain mail.
> > Who started this? He got the big response I think. Hats off!
> >
> > Sorry for this mail, but try to understand my intension and
> > how my mail
> > box is filling right from yesterday and pain for deleting
> >
> > Friendly yours,
> > Sreenath.
> >
> >
> >
> > On Tue, 25 Jul 2000, Chartoff, Richard P wrote:
> >
> > ::The University of Dayton has the following RP equipment:
> > ::SLA 250/50
> > ::SLS 2000
> > ::FDM 1650
> > ::Sanders MM6
> > ::LOM 1015
> > ::2 LOM 2030
> > ::One of our LOM 2030 machines is specially modified to do
> > curved surface
> > ::lamination
> > ::We also have custom built, small size (table top) SLA and
> > LOM equipment, a
> > ::complete laser diagnostic lab, and a complete materials
> > testing facility.
> > ::More information on our website: www.udri.udayton.edu/rpdl
> > ::
> > ::Regards,
> > ::
> > ::Richard P. Chartoff, Ph.D.
> > ::Professor of Chemical and Materials Engineering
> > ::Univeristy of Dayton
> > ::Dayton, Ohio 45469-0130
> > ::USA
> > ::
> > ::Tel: 937-229-2517
> > ::FAX: 937-229-2503
> > ::e-mail: chartoff@udri.udayton.edu
> > ::
> > ::URL: www.udri.udayton.edu/PolymerCenter
> > :: www.udri.udayton.edu/rpdl
> > :: www.udri.udayton.edu/e-beam
> > ::
> > ::
> > ::For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
> > ::
> >
> >
> > For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
> >
> >
> > For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
> >
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:56 EEST