This happens on BOTH of our SAL-500s with EVERY build!
-----Original Message-----
From: Deak, Steve [SMTP:sdeak@hasbro.com]
Sent: Tuesday, August 29, 2000 12:07 PM
To: 'Douglas Hardy'; kdenton@williams-int.com
Cc: rp-ml@bart.lpt.fi
Subject: RE: Buildstation 5.1
That was our first impression, but not true. If autodrain is "off"
the
popup window will tell us the "build is done, do you want to drain
the
part?" And if autodrain is "on" the pop up window only states the
build is
complete, as if the platform is draining. When this text box is
dismissed,
the operator still must manually raise the platform.
Again, this is a sporadic problem, It does not happen all the time
with
buildstation 5.1, at least on our machines. May not be software
related at
all. Could be a faulty microswitch on the z-stage, or other device.
The
problem is to get the fault to occur when the 3D field service
person is
present!
Steve Deak
Mgr.-Rapid Prototyping e-mail: sdeak@hasbro.com
Hasbro, Inc. voice: (+1) 513-579-3270
615 Elsinore Place fax: (+1) 513-579-3250
Cincinnati, OH 45202 USA Making The World Smile TM
-----Original Message-----
From: Douglas Hardy [mailto:douglas_hardy@hotmail.com]
Sent: Tuesday, August 29, 2000 10:32 AM
To: kdenton@williams-int.com
Cc: rp-ml@bart.lpt.fi
Subject: Buildstation 5.1
Karl
Switch "Auto Drain" "On" this might "Automatically Drain" the part
on
completion.
Doug
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:04:11 EEST