Re: Surface Texture on RP Models

From: anza@fuse.net
Date: Thu Sep 28 2000 - 01:21:27 EEST


Howdy,

If you read closely, the original email asks how to apply a surface texture
to a SOLID MODEL, not to the rapid prototpye.
-----Original Message-----
From: Rick Klepacz <proto@prototechengineering.com>
To: KDenton@williams-int.com <KDenton@williams-int.com>
Cc: joe@frantzind.com <joe@frantzind.com>; rp-ml@bart.lpt.fi
<rp-ml@bart.lpt.fi>
Date: Wednesday, September 27, 2000 3:17 PM
Subject: Re: Surface Texture on RP Models

>My response is a little late on this one, but for some reason I deleted the
>original email. We do all kinds of texturing on our prototypes. When
we've
>been provided with a good texture sample, we've had lots of success
matching it
>on our prototypes. If you need more information or would like some help,
give
>me a call.
>
>Rick Klepacz
>Account Executive
>Prototech Engineering, Inc.
>7233 Adams Street
>Willowbrook, IL 60521
>630-920-0370
>f630-920-0377
>
>KDenton@williams-int.com wrote:
>
>> Hello all,
>>
>> Drew Brown of Conceptual Reality has also done some very cool things with
>> applying textures to RP parts.
>>
>> http://www.conceptual-reality.com
>>
>> Karl
>>
>> -----Original Message-----
>> From: Joseph P. Frantz [SMTP:joe@frantzind.com]
>> Sent: Wednesday, September 27, 2000 9:37 AM
>> To: rp-ml mail list
>> Subject: Fw: Surface Texture on RP Models
>>
>> -----Original Message-----
>> From: Joseph P. Frantz <joe@frantzind.com>
>> To: AHastbacka@aol.com <AHastbacka@aol.com>
>> Date: Wednesday, September 27, 2000 8:35 AM
>> Subject: Re: Surface Texture on RP Models
>>
>> >Al,
>> >
>> >Call Lee Eisinger at Akron Metal Etching (330) 762-7687
>> www.textureame.com.
>> >They have applied some amazing textures to PR parts.
>> >
>> >Joe
>> >
>> >-----Original Message-----
>> >From: AHastbacka@aol.com <AHastbacka@aol.com>
>> >To: rp-ml@bart.lpt.fi <rp-ml@bart.lpt.fi>
>> >Date: Wednesday, September 27, 2000 1:59 AM
>> >Subject: Surface Texture on RP Models
>> >
>> >
>> >>We have a customer who would like to apply a surface texture
onto
>> an RP
>> >>model as part of the building process. The surface texture is
>> alligator
>> >>skin. Does anyone have experience with laying down a surface
>> (e.g,
>> >alligator
>> >>skin) on a solid model to end up with an STL or SLC file that
can
>> be
>> >>fabricated with an RP system.
>> >>
>> >>Regards,
>> >>Al Hastbacka
>> >>Sanders Design
>> >>http://www.sandersdesign.com
>> >>
>> >>
>> >>
>> >>For more information about the rp-ml, see
http://ltk.hut.fi/rp-ml/
>> >
>>
>> For more information about the rp-ml, see
http://ltk.hut.fi/rp-ml/
>>
>> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
>--
>
>
>
>
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:04:25 EEST