Hello All
We have been searching for 3D files to make parts however we require STL for
part manufacture and are receiving mostly info about DXF files. Can some of
you recommend the proper or suggested route to convert or create an STL from
a DXF file? Any thoughts are suggested.
Pam
M2 Systems
14 Finance Dr. Danbury Ct. 06810
p.203-791-9968 f.203-778-1006
----- Original Message -----
From: "C. Brock Rooney" <brock@mich.com>
To: <rp-ml@bart.lpt.fi>
Sent: Tuesday, November 07, 2000 9:34 AM
Subject: Re: STL Viewer for Mac
> How about converting stl to vrml (.wrl) and viewing it with a web browser?
>
> >----- Original Message -----
> >From: Wan, Tee <Tee.Wan@nike.com>
> >To: <rp-ml@bart.lpt.fi>
> >Sent: Monday, November 06, 2000 9:12 PM
> >Subject: STL Viewer for Mac
> >
> >
> >> Thank you to all who replied. Currently, it doesn't look like there is
an
> >> STL viewer that runs directly on Mac OS.
> >>
> >> Options are:
> >>
> >> -pc emulator running an STL viewer program
> >> -Amorphium software to view 3D DXF files
> >> -CAD Mover (retrieves files but can spin)
>
> C. Brock Rooney, Pres., Brock Rooney & Associates Inc. (Brockware)
> 915 Westwood Birmingham MIchigan 48009 USA
> (248)645-0236 fax(248)645-9020 email brockware@ameritech.net
>
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
>
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:04:39 EEST