Look at Myriad -- www.infograph.com -- their product will let u measure
things and also do surface area and volume.
AR
-----Original Message-----
From: owner-rp-ml@rapid.lpt.fi [mailto:owner-rp-ml@rapid.lpt.fi]On Behalf
Of Brent Stucker
Sent: Thursday, August 02, 2001 2:10 PM
To: 'Steve Stewart'; 'Rapid Prototyping Mailing List (E-mail)'
Subject: RE: Interrogating .stl files
Steve,
Algorithms can be written to do this. A student of mine, Xiuzhi Qu, has
written code to make this possible using our own viewer, and I am sure the
code could be modified to do this easily as a stand-alone "interrogator"
program which outputs the information of interest. Just about anyone who
has done programming with STL files could develop a software interrogator
capable of doing this.
Brent
_________________________________________________
Dr. Brent Stucker, Director & Asst. Professor
Rapid Manufacturing Center
University of Rhode Island
Dept. of Industrial and Manufacturing Engineering
Gilbreth Hall, 2 East Alumni Ave.
Kingston, RI 02881
ph: (401)874-5187
fax: (401)874-5540
stucker@uri.edu
web: http://www.egr.uri.edu/ime/RMC
-----Original Message-----
From: owner-rp-ml@rapid.lpt.fi [mailto:owner-rp-ml@rapid.lpt.fi]On
Behalf Of Steve Stewart
Sent: Thursday, August 02, 2001 3:45 PM
To: Rapid Prototyping Mailing List (E-mail)
Subject: Interrogating .stl files
Is there any way to interrogate an .stl file to get information such as
X, Y, Z, volume, surface area without having to bring it up in a viewer like
SolidView?
================================================
Steve Stewart
steve@protogenic.com
protogenic, inc.
http://www.protogenic.com
1490 w. 121 ave., suite 101
phone:303-252-0212
westminster, co 80234
fax:303-252-0223
================================================
Protogenic - Always on time,
Always great Customer service,
Always top quality.
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:57:36 EET