From: Michael Tsenter (nesttech@pacbell.net)
Date: Thu Mar 28 2002 - 03:08:45 EET
You may visit our web site showing the CAMATTINI Protomix Vacuum Casting
& Polyurethane Injection System. We also have a video that shows the
basic process of making RTV molds and casting polyurethane parts.
RIM can be high pressure or low pressure. If you use RTV molds, it is
usually low pressure. High pressure RIM is used with large automotive
parts and foam processing. If you make parts that have thin walls and
intricate details, you should use low pressure and vacuum to help get
the material in all areas of the mold.
Best regards,
Michael Tsenter
x9408894@eng.tofs.ac.za wrote:
> Hallo there.
>
> I am currently looking for information on RIM casting and
> specifically the use of RTV molds and HTV molds in these
> prosesses. Information on other molds for RIM casting will also be
> appreciated.
> Thanks
> Martin
>
> For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
-- NEST Technologies, Inc. 3849 Ridgemoor Drive Studio City, CA 91604 USA Tel: 818-761-6500 Fax: 818-761-6116 e-mail: nesttech@pacbell.net web site: http://www.nesttechnologies.comFor more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:39 EET