From: David K. Leigh (dkleigh@harvest-tech.com)
Date: Fri Apr 12 2002 - 16:08:39 EEST
On part parameters. . . Enter a specified laser power for a specefied height for the specified part. This is 100% manual, so if you are trying to compensate for z-growth, you have to preview and find the height.
*************************************************************
David K. Leigh ph (254) 933-1000
Harvest Technologies, Inc. fax (254) 298-0125
Rapid Prototyping Services www.harvest-tech.com
----- Original Message -----
From: Roger Spielman
To: 'Brian Caulfield' ; Rapid Mailing List
Sent: Thursday, April 11, 2002 5:33 PM
Subject: RE: Varied Laser Power by height
Absolutely. Step or slope of power can be programmed at will. This has been possible since the first machines.
Roger Spielman
Regale Inc.
-----Original Message-----
From: Brian Caulfield [mailto:brian.caulfield@nuigalway.ie]
Sent: Thursday, April 11, 2002 8:17 AM
To: Rapid Mailing List
Subject: Varied Laser Power by height
Can the laser power parameter be varied on a SLS 2500+ by the z-height of the part?
Brian
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:41 EET