From: Kevin Hartke (kevinhartke@mlpc.com)
Date: Thu May 30 2002 - 00:38:09 EEST
Doug,
The company I work for does laser micromachining in the hole sizes
that you have described below. We use a UV direct write process which
allows you to provide a .dxf file and we transpose this to the surface
of the part using our fully integrated laser micromachining system. If
you could provide some sample material to the address below I would be
happy to provide an example of what the machining would look like.
Also, FYI. Mound Laser & Photonics Center, Inc. is a full service laser
marking and micromachining application development company. We focus on
providing research & development, laser application development, and
laser job shop services to the commercial and defense industries. MLPC
provides access to the latest in solid-state diode-pumped technology and
highly trained personnel. If you have other questions regarding laser
micromachining, marking, or welding please give us a call.
Kevin Hartke
Mound Laser & Photonics Center, Inc.
Manager of Sales and Marketing
720 Mound Ave.
COS - 308
Miamisburg, OH 45342
Phone: 937-865-3730
Cell: 937-545-4799
Website: www.mlpc.com <http://www.mlpc.com/>
-----Original Message-----
From: owner-rp-ml@rapid.lpt.fi [mailto:owner-rp-ml@rapid.lpt.fi] On
Behalf Of parts
Sent: Wednesday, May 29, 2002 5:04 PM
To: RP Mailing List
Subject: Machining Ceramics?
Hi All,
Here is what I am looking for...
Do any of you work with machinable ceramics?
If so which type is preferred to hold the best tolerance?
I am looking to put in 40-50 0.150mm holes spaced at 0.165mm, thickness
to drill through is 0.5-.75mm.
I will be working up some drawings for this in the next day or two, any
input you could give me now would aid in this design.
Thanx again,
Doug Johnson
ProtoCall, LLC
507 West College Avenue
Waukesha, WI 53186-4501
262.446.3104
262.896.8945 fax
414.915.0036 cell
<http://www.protocallonline.com/> www.protocallonline.com
parts@protocallonline.com
Tempered RP available this summer!
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:49 EET