cheap scanner

From: Bram de Smit (A.desmit@IO.TUdelft.NL)
Date: Tue Mar 18 2003 - 15:02:33 EET

• Next message: Neil Hopkinson: "RE: Heat transfer & stereolithographic models"
• Previous message: JC Adams: "Heat transfer & stereolithographic models"
• Next in thread: Mitchell, Doug (D.B.): "RE: cheap scanner"
• Maybe reply: Mitchell, Doug (D.B.): "RE: cheap scanner"
• Reply: Ing. R.W. van der Burg: "Re: cheap scanner"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi list,

For our research we would like to have a 3D scanner that is capable to scan objects from say 10 times 10 cm (4 times 4 inch) up to one square meter (40 times 40 inches)
The accuracy that we want is not extremely high and also the resolution doesn't need to be top of the bill.
We found that the Minolta VI300 or VI700 would be really suitable for us but they seem not to be on the marked anymore, as they are replaced by the VI900.

Unfortunately scanners prove to be quite expensive and our budget limited.
My question: does any of you know about a (low end) 3D scanner that can be bought for around $15000,-?
Also a used scanner could be ok, as long as it works.

thanks in advance

--
Bram de Smit,
Delft University of Technology / Faculty of Design, Engineering and Production (DEP) / room nr. 10-3A-31 / Landbergstraat 15, 2628 CE, Delft, The Netherlands / Phone  +31 15 2783788 / Fax  +31 15 2787316 / E-mail  A.deSmit@IO.TUDelft.NL / www.io.tudelft.nl/research/ica/

• Next message: Neil Hopkinson: "RE: Heat transfer & stereolithographic models"
• Previous message: JC Adams: "Heat transfer & stereolithographic models"
• Next in thread: Mitchell, Doug (D.B.): "RE: cheap scanner"
• Maybe reply: Mitchell, Doug (D.B.): "RE: cheap scanner"
• Reply: Ing. R.W. van der Burg: "Re: cheap scanner"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:17:16 EET