Re: cheap scanner

From: Ing. R.W. van der Burg (r.vanderburg@ind.tno.nl)
Date: Tue Mar 18 2003 - 15:44:59 EET


Hi Bram,

We can help you futher with this matter.
Please contact me to discuss the subject in detail.

Best regards,
Roel van der Burg
TNO Industrial Technology
De Rondom 1
5612 AP Eindhoven
PO box 6235
5600 HE Eindhoven
tel: +31-(0)40 - 26 50 614
fax: +31-(0)40 - 26 50 769
gsm: +31-(0)6 - 23 68 63 54
web: www.ind.tno.nl

Bram de Smit wrote:

> Hi list,
>
> For our research we would like to have a 3D scanner that is capable to scan objects from say 10 times 10 cm (4 times 4 inch) up to one square meter (40 times 40 inches)
> The accuracy that we want is not extremely high and also the resolution doesn't need to be top of the bill.
> We found that the Minolta VI300 or VI700 would be really suitable for us but they seem not to be on the marked anymore, as they are replaced by the VI900.
>
> Unfortunately scanners prove to be quite expensive and our budget limited.
> My question: does any of you know about a (low end) 3D scanner that can be bought for around $15000,-?
> Also a used scanner could be ok, as long as it works.
>
> thanks in advance
>
> --
> Bram de Smit,
>
> Delft University of Technology / Faculty of Design, Engineering and Production (DEP) / room nr. 10-3A-31 / Landbergstraat 15, 2628 CE, Delft, The Netherlands / Phone +31 15 2783788 / Fax +31 15 2787316 / E-mail A.deSmit@IO.TUDelft.NL / www.io.tudelft.nl/research/ica/



This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:17:16 EET