From: Markus Hitter (mah@jump-ing.de)
Date: Thu Sep 04 2003 - 16:58:22 EEST
Am Donnerstag, 04.09.03 um 15:11 Uhr schrieb David K. Leigh:
> Since it is a 3D Systems laser, my guess is the best person to service
> it would be 3D Systems.
Well as of a SLA250, it was a standard laser on a 3D Systems machine.
So, standard diagnosis and safety rules for lasers apply. Make sure,
sensors, mirrors and windows are clean. If that doesn't help, get a
laser power meter and measure laser power in different locations on the
beam path ...
Looking with sharp eyes rarely makes a matter worse than it is, but you
have been warned about loosing warranty etc. ...
- - - - - - - - - - - - - - - - - - -
Dipl. Ing. Markus Hitter
http://www.jump-ing.de/
This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:18:01 EET