Re: [rp-ml] 1 Micron Manufacturing Technique

From: Caleb Walker <caleb_at_kreysler.com>
Date: Wed Oct 06 2004 - 04:30:42 EEST

I believe you are going to have a problem here...even if you can get someone
to agree to the tolerance you will have to ask your customer at what temp do
they want it to measure up! I believe(though haven't checked) it takes very
little change in temp to cause an aluminum part to vary by 1 micron....

Caleb Walker - Lead CAD/CAM

Kreysler & Assoc.
Digital Sculpture Enlargement
Architectural Composites

----- Original Message -----
From: "Baran Dag" <baran.dag@infotron.com.tr>
To: <rp-ml@rapid.lpt.fi>
Sent: Tuesday, October 05, 2004 12:16 AM
Subject: [rp-ml] 1 Micron Manufacturing Technique

I have a big problem.
The problem is this cylindrical part, roughly 50 mm in diameter and 150
mm in height. It has relatively simple geometry
but the part dimensions must be within 1 micron tolerance.
Can anyone build an aluminum part like this?
Thanks!

-- 
Baran M. Dag
Teknoloji Danışmanı
Technology Consultant
infoTrON A.S.
Birlikte Geleceği Yaratıyoruz
we Create the Future together
(T) +90 216 651 09 55
(F) +90 216 651 09 54

Received on Wed Oct 06 03:22:37 2004

This archive was generated by hypermail 2.1.8 : Tue Jan 12 2010 - 19:37:12 EET