RE: [rp-ml] adding fillets to STL files

From: Ed Lambourne (ebl@delcam.com)
Date: Thu Feb 17 2005 - 15:49:59 EET


Jeff

In Delcam's CopyCAD http://www.copycad.com/ you can construct new surface
geometry by measuring, extracting and sketching on the triangle model. The
constructed surface geometry can then be used to morph the original STL
triangle model to match the surface geometry, with the necessary triangle
model refinement and blending happening automatically to the user defined
tolerance.

Hope that helps

Ed
-----------------------------------------------------------
Ed LAMBOURNE Delcam plc
Technical Director Small Heath Business Park,
ebl@delcam.com Birmingham, B10 0HJ, UK
Tel:+44(0)121-766-5544 Fax: +44(0)121-766-5511
http://www.delcam.com Mobile: +44 (0)7775 642817
Delcam - Winner of the 2003 & 2004 Queen's Award for Enterprise

-----Original Message-----
From: Bondy, Jeff S [mailto:JBondy@howmet.com]
Sent: 11 February 2005 20:27
To: RP list (E-mail)
Subject: [rp-ml] adding fillets to STL files

I'm looking for input on software that is capable of adding fillets or break
edges to files at the STL level.

Any thoughts?

Jeff Bondy
b
Howmet Research Corporation
1500 South Warner Street
Whitehall, Michigan 49461
(231) 894-7762
(231) 981-3212 fax
jbondy@howmet.com



This archive was generated by hypermail 2.1.7 : Mon Jan 02 2006 - 08:09:06 EET