[rp-ml] Rapid Tooling/Injection Mold Supplier Needed

From: Ken L. Kornele/AT-Austin/3M/US (klkornele@mmm.com)
Date: Thu Feb 17 2005 - 17:52:11 EET

• Next message: Robert Jaquiss: "[rp-ml] Looking for sources of Silicone RTV"
• Previous message: Ed Lambourne: "RE: [rp-ml] adding fillets to STL files"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi All,

I have a project leader looking for injection molding tooling options. He
has six parts which comprise an enclosure. He needs to get 200 sets of
injection molded parts out of Xenoy by 4/28/05.

The two larger parts which make up the housing bottom and housing top are
appx. 5.9”x12.22”x1.6” and 5.84” x 11.7” x 1.11”. Three of the parts fall
within a 6”x6”x1.06” footprint. The smallest and simplest part is 2.13”x
1.01”x.1”.

If you are interested in this or know someone who can handle a project like
this please contact me off list and I will put you in contact with the
project lead.

Thanks,

Ken

Ken Kornele
3M Austin Rapid Prototyping Center
A141-1S-04
6801 River Place Blvd.
Austin, TX 78726-9000
Phone (512) 984-3985
Fax (512) 984-5064
klkornele at mmm com

• Next message: Robert Jaquiss: "[rp-ml] Looking for sources of Silicone RTV"
• Previous message: Ed Lambourne: "RE: [rp-ml] adding fillets to STL files"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Mon Jan 02 2006 - 08:09:06 EET