[rp-ml] Jewelry minimum parameters

From: Jonathan Chertok (Universal Joint) <chertok_at_universaljointdesign.com>
Date: Fri Jan 04 2008 - 17:43:03 EET

Can anyone help me out with minimum thicknesses for pendant sized
jewelry, particularly with respect to rp processes?

For instance is there a minimum diameter for a "rod" that is holding one
part to another? What about the thickness of a "surface"?

Also is this process-dependent and if so what are the options here?

Off-list contact is welcome.

Thanks,

Jonathan

-- 
Universal Joint Design Associates
Jonathan Chertok. Principal
AIA Associate
Austin, Texas  1 512 407 9628
Development + Design + Construction
http://www.universaljointdesign.com
[ bLOG ] on digital tools, rapid prototyping technologies and the 
fabrication of free-form structure.
This e-mail and its attachments may contain confidential information. It
is intended solely for the use of the addressee(s) named herein. Any use
of the information contained herein by other persons is prohibited. If
you have received this e-mail by mistake, please immediately notify the
sender (via the phone number above or email) and permanently delete the
original as well as any copy thereof.
Do not use any files or other data, via ftp or other means, without
subsequent permission in writing.
UJDA does not accept any liability for the contents of this
e-mail or its attachments.

Received on Fri Jan 04 16:14:41 2008

This archive was generated by hypermail 2.1.8 : Tue Jan 06 2009 - 15:48:27 EET