Re: [rp-ml] "Good" stl settings

From: Jonathan Chertok (Universal Joint) <chertok_at_universaljointdesign.com>
Date: Sat Jan 05 2008 - 01:13:51 EET

Thanks to all for the expertise and assistance.

***

I've got 4" x 5" x 5" envelope parts.

Can I go wrong with the equivalent of a Maximum Chordal Deviation - for
a file set in mm - of .1?

My understanding is that this is essentially .1 mm. Do I need to go to
.01 mm if I want high resolution parts?

I'd like to get this one right as they are all moving downstream and I
don't want to have to walk it all back.

Most Sincerely,

Jonathan

-- 
Universal Joint Design Associates 
Jonathan Chertok. Principal 
AIA Associate
Austin, Texas  1 512 407 9628 
Development + Design + Construction 
http://www.universaljointdesign.com 
[ bLOG ] on digital tools, rapid prototyping technologies and the fabrication of free-form structure.
This e-mail and its attachments may contain confidential information. It
is intended solely for the use of the addressee(s) named herein. Any use
of the information contained herein by other persons is prohibited. If
you have received this e-mail by mistake, please immediately notify the
sender (via the phone number above or email) and permanently delete the 
original as well as any copy thereof. 
Do not use any files or other data, via ftp or other means, without 
subsequent permission in writing.
UJDA does not accept any liability for the contents of this
e-mail or its attachments. 

Received on Fri Jan 04 23:45:22 2008

This archive was generated by hypermail 2.1.8 : Tue Jan 06 2009 - 15:48:27 EET