RE: [rp-ml] Parts washer needed

From: Bruce LeMaster <lemaster_at_artcorp.com>
Date: Wed Jan 16 2008 - 19:09:05 EET

Hi Lisa,

 

The Ramco parts washers are definitely expensive but well worth the
investment. As for using alcohol in a parts washer - Don't. I would
not recommend it and I'm sure your local fire marshal would say the same
thing. You should look at using TPM or Polyflush. We switched to
Polyflush several years ago and have been very happy with the results.
You can purchase it through Dynaloy at 800-669-5709. The cost is about
$800 per 55 gallon drum.

 

Please feel free to contact me directly if you have any additional
questions.

 

Good luck,

Bruce E. LeMaster

 

Applied Rapid Technologies Corporation

1130 International Parkway, Suite 127

Fredericksburg, Virginia 22406

540-286-2266 / 540-286-5252 fax

http://www.artcorp.com

 

________________________________

From: owner-rp-ml@rapid.lpt.fi [mailto:owner-rp-ml@rapid.lpt.fi] On
Behalf Of Lisa Bailey
Sent: Wednesday, January 16, 2008 10:34 AM
To: rp-ml@rapid.lpt.fi
Subject: [rp-ml] Parts washer needed

 

Hello all,

We just purchased a SLA 5000 from 3d systems. We are in need of a parts
washer. I have received quotes from Ramco & Safety Kleen and I was
definitely in sticker shock! Anyone know of any GOOD CONDITION used
ones out there, or somewhere else we could look for a parts washer?

We will be using alcohol in it, and it needs to have a cleaning area
minimum of 20" x 20" and a depth of 16"-20"

Please let me know as soon as you can, as we are in need now!

Thank you for you time.

Lisa

 
Received on Wed Jan 16 17:44:23 2008

This archive was generated by hypermail 2.1.8 : Tue Jan 06 2009 - 15:48:27 EET