RE: [rp-ml] Fwd: Jet Wax Materials for Solidscape 3D Systems

Isn't the compatibility claim related to solubility, i.e., you can mix them and nothing will react and clog up inside the machine? That would be a reasonable claim to make IMHO.

I'm also seriously considering to try it, didn't have the guts yet.

Ricardo

Date:Sun, 11 Jan 2009 14:52:06 -0800
From: adler@a3dm.com
To: 'joepuska.iwon' <joepuska@iwon.com>
 <rp-ml@rapid.lpt.fi>
> Joe
>
>
> I would advise Caveat Emptor for now.
>
>
> There is some testing being done but, it seems unrealistic to me
> that these materials could be "It is 100% compatible InduraCast,
> BlueCast, Bluecast 2 and ProtoBuild materials" and "100% compatible
> with Solidscape's InduraFill and ProtoSupport"
>
>
> Truth be toldN the older and newer Solidscape materials named are
> not 100% compatible with each other so it is hard concieve that jet-
> wax could be possibly be so accomodating. Solidscape jet
> materials, both build and support, will also have different
> viscosities and thus configurations used to determine dot pitch
> rely on these specific and measurable properties for functional
> accuracy. Obviously, I am concerned about the assertions made by
> the manufacturer and will report on the findings after adequate
> testing.
>
>
> Read Today's Blog at
>
> http://www.jckonline.com/blog/1020000502.html
>
>
> Steven Adler
>
> A3DM
>
> www.a3dm.com
>
> adler@a3dm.com
>
> 503.659.2300
>
> =====================================
>
>
> From: owner-rp-ml@rapid.lpt.fi [mailto:owner-rp-ml@rapid.lpt.fi] On
> Behalf Of joepuska.iwon
> Sent: Sunday, January 11, 2009 5:29 AM
> To: rp-ml@rapid.lpt.fi
> Subject: [rp-ml] Fwd: Jet Wax Materials for Solidscape 3D Systems
>
>
> -----Original Message-----
> From: "joepuska.iwon" [joepuska@iwon.com]
> Date: 01/11/2009 08:27 AM
> To: majordomo@rapid.lpt.fi
> Subject: Fwd: Jet Wax Materials for Solidscape 3D Systems
>
> Note: Original message sent as attachment
Received on Mon Jan 12 02:20:14 2009