Re: [rp-ml] ASTM F42

>> Terry has also led another effort to create a full list of terms, a disctionary - so the industry overall can speak the same language.

Thanks, Fran, but I cannot take credit (maybe some blame) for this initial list of terms. I wish it was complete and comprehensive, but it's not. The terminology standards effort is being handled in phases. The first phase consisted of about 25 terms and definitions. Most of us are new at the development of industry standards, so we're learning as we go. Thanks to the leadership and help of Brent Stucker (chairman of ASTM International Committee F42) and others, including the people at ASTM, to move it forward.

Terry

  ----- Original Message -----
  From: Francis.Rabuck@bentley.com
  To: tw@wohlersassociates.com ; rp-ml@rapid.lpt.fi ; mail@creaturecompany.com
  Sent: Tuesday, January 12, 2010 10:04 AM
  Subject: RE: [rp-ml] ASTM F42

  I just wanted to add to Terry's comments. I attended the meetings leading to the selection of a single phrase/caption/tag word for the industry movement - and coming to the conclusion of AM - "additive manufacturing" was not easy. I do think that it is a positive upgrade of the phrase Rapid Prototyping - as the industry is moving from prototyping to manufacturing of 3D objects much more quickly as a whole. The word "additive" also describes the majority of processes used in the industry - and is probably better than Rapid (a more subjective term - on speed/time)

  Terry has also led another effort to create a full list of terms, a disctionary - so the industry overall can speak the same language.

  If you are interested in this, I highly suggest you join ASTM and Committee F42. The leaders in the AM industry are members (hardware, software, large and small customers) and are helping to create a clear vision, language and roadmap of activity that members of this list would all find valuable.

  What I don't want here is another round of debates on words, terms, and definitions. The content and exchange of ideas here is too valuable and I prefer the exchange of real ideas, models, events, questions and issues - everyday nagging problems that we need to deal with.

  Just my thoughts,

  Fran

  Francis Rabuck
  Bentley Systems, Incorporated * Director, Intelligent Infrastructure Lab

  From: owner-rp-ml@rapid.lpt.fi [mailto:owner-rp-ml@rapid.lpt.fi] On Behalf Of Terry Wohlers
  Sent: Tuesday, January 12, 2010 10:49 AM
  To: RP-ML; The Creature Company
  Subject: Re: [rp-ml] milling=am?

  Hi Lino,

  I will do my best to answer your question.

  In its broadest sense, "rapid prototyping" can be any method or technique to quickly make a prototype. Over a period of nearly two decades, many of us have used rapid prototyping to refer to the class of additive systems that produce parts layer by layer. The reason is because these systems have been used extensively for the making of models and prototype parts. In recent years, these and newer-generation additive systems have become increasingly useful for a broader range of applications. They include the making of models, prototypes, patterns for castings and tooling, tooling inserts, fixtures and assembly tools, drill guides, custom and limited edition products, replacement parts, short-run production, and in some cases, full production. The use of the term rapid prototyping to represent these applications has been inaccurate and misleading.

  An industry-led standards group was formed one year ago. The initial motivation came from Society of Manufacturing Engineers' Rapid Technologies and Additive Manufacturing (RTAM) community. This work, led by Dr. Brent Stucker of Utah State University, resulted in the formation of ASTM International Committee F42 on Additive Manufacturing Technologies. It has approved "additive manufacturing" as the generic term for the technology and industry. The international committee has defined AM as the process of joining materials to make objects from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing methodologies. Synonyms are: additive fabrication, additive processes, additive techniques, additive layer manufacturing, layer manufacturing, and freeform fabrication.

  I hope this helps.

  Terry
   
  ************
  Terry Wohlers
  Wohlers Associates, Inc.
  OakRidge Business Park
  1511 River Oak Drive
  Fort Collins, Colorado 80525 USA
  970-225-0086
  Fax 970-225-2027
  tw@wohlersassociates.com
  http://wohlersassociates.com

    ----- Original Message -----

    From: The Creature Company

    To: rp-ml@rapid.lpt.fi

    Sent: Tuesday, January 12, 2010 7:01 AM

    Subject: [rp-ml] milling=am?

    I believe we had the discussion before but I have searched the archives and haven't seems to locate the thread.

    In the move to rename the technology we use from RP to AM how do we classify CNC and Milling? CNC and milling are to be subtractive in nature. They obviously do not fit into the realm of additive manufacturing however they are a rapid technology.

    That makes we wonder if the terms RP and AM are not synonymous but set up as a hierarchy, whereas rapid prototyping includes additive and subtractive manufacturing. Am I correct in saying that?

    I have been a bit flustered since I felt the push was not to use the term RP any more since it's "not cool". Thoughts?

    Lino
Received on Tue Jan 12 19:28:34 2010